---------------------------------------------------------- RV14-List Digest Archive --- Total Messages Posted Mon 01/07/13: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:26 AM - Thanks for the list Matt! - Plans Rev. pg 11-03 (Tim Olson) 2. 07:00 AM - Re: Thanks for the list Matt! - Plans Rev. pg 11-03 (Dave Saylor) ________________________________ Message 1 _____________________________________ Time: 06:26:14 AM PST US From: Tim Olson Subject: RV14-List: Thanks for the list Matt! - Plans Rev. pg 11-03 Thanks to Matt for setting up an RV-14 email list. Those of you on this list (maybe very few at this point) who know me, know that I prefer email based lists...the messages pop into your inbox where you can address them quickly. It makes for a speedy way to pass along info. I'm builder 140032, and got my kit 12/21/2012. So far I'm done with section 11 and 1/2 way through 12 almost. I find that the RV-14 plans in some cases so far, are perhaps a little more vague than the RV-10, although the kit itself has some nice little improvements. In the section on countersinking the spar in section 11, they do show the max depth and width of the countersinks you create, but, they don't go into detail as to what the ultimate goal of the countersunk hole will be. In the -10 plans they have you test dimple a scrap of aluminum so that you get the depth to a workable depth for assembly later. Anyway, it does take a little interpreting and reading ahead if you're a 1st time builder. I have a website regarding my RV-10 at http://www.MyRV10.com, and although I still update it, it won't be changing drastically in the future. I also have one set up for the RV-14 at http://www.MyRV14.com that I will use to document the build, but I will not be spending nearly the time writing as I did on the other plane. I probably have as much time into writing as building on that kit. I did have one plans correction I found, and Van's has already changed it on their plans, but it somehow didn't make it into my plans when they shipped just a few weeks ago. On page 11-03 the "AFT / UP / Inboard" label was wrong in 2 diagrams, but they have it changed now to "FWD / UP / Inboard", so they were already on it. I'm sure we'll find more changes as we go through the build. I just wanted to make a quick introduction and let anyone else who signed on the list know that I'll be monitoring the list, so email here when you run into questions or issues. Tim RV-10 N104CD ________________________________ Message 2 _____________________________________ Time: 07:00:26 AM PST US From: Dave Saylor Subject: Re: RV14-List: Thanks for the list Matt! - Plans Rev. pg 11-03 Hi Tim, can't wait to see your progress. Anyone else wish there was a 540 option? Dave Saylor 831-750-0284 CL On Mon, Jan 7, 2013 at 6:26 AM, Tim Olson wrote: > > Thanks to Matt for setting up an RV-14 email list. Those of you > on this list (maybe very few at this point) who know me, know > that I prefer email based lists...the messages pop into > your inbox where you can address them quickly. It makes for > a speedy way to pass along info. > > I'm builder 140032, and got my kit 12/21/2012. So far I'm done > with section 11 and 1/2 way through 12 almost. I find that the > RV-14 plans in some cases so far, are perhaps a little more > vague than the RV-10, although the kit itself has some nice > little improvements. In the section on countersinking the spar > in section 11, they do show the max depth and width of the > countersinks you create, but, they don't go into detail as to > what the ultimate goal of the countersunk hole will be. In the > -10 plans they have you test dimple a scrap of aluminum so that > you get the depth to a workable depth for assembly later. > Anyway, it does take a little interpreting and reading ahead > if you're a 1st time builder. I have a website regarding > my RV-10 at http://www.MyRV10.com, and although I still update > it, it won't be changing drastically in the future. I also > have one set up for the RV-14 at http://www.MyRV14.com that > I will use to document the build, but I will not be spending > nearly the time writing as I did on the other plane. I probably > have as much time into writing as building on that kit. > > I did have one plans correction I found, and Van's has already > changed it on their plans, but it somehow didn't make it into > my plans when they shipped just a few weeks ago. On page 11-03 > the "AFT / UP / Inboard" label was wrong in 2 diagrams, but > they have it changed now to "FWD / UP / Inboard", so they were > already on it. I'm sure we'll find more changes as we go > through the build. > > I just wanted to make a quick introduction and let anyone > else who signed on the list know that I'll be monitoring > the list, so email here when you run into questions or issues. > > Tim > RV-10 N104CD > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv14-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV14-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv14-list Browse Digests http://www.matronics.com/digest/rv14-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.