Today's Message Index:
----------------------
1. 12:52 AM - Introduction (Ian Pearce)
2. 06:11 AM - Re: RV14-List Digest: 2 Msgs - 01/07/13 (Comcast)
3. 06:11 AM - Re: RV14-List Digest: 2 Msgs - 01/07/13 (Comcast)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Just a quick note of introduction.
I am builder 140053, having just sent off my deposit, I now have to
patiently wait for the kit to be put together and then a trip on a slow boat
"down under".
Looking forward to the discussions which I am sure will eventuate as we
progress.
Regards,
Ian Pearce
Adelaide, Australia
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV14-List Digest: 2 Msgs - 01/07/13 |
Hi gang.
I'm Gordon, in Lawrenceville, Ga. Been working on my 14 wing kit for a week.
Spar is done, rib prep in progress.
When not doing that, I fly my Bcker Jngmann biplane, and some corporate jets.
Sent from me
On Jan 8, 2013, at 2:57 AM, RV14-List Digest Server <rv14-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete RV14-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the RV14-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-01-07&Archive=RV14
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-01-07&Archive=RV14
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> RV14-List Digest Archive
> ---
> Total Messages Posted Mon 01/07/13: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:26 AM - Thanks for the list Matt! - Plans Rev. pg 11-03 (Tim Olson)
> 2. 07:00 AM - Re: Thanks for the list Matt! - Plans Rev. pg 11-03 (Dave
Saylor)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 06:26:14 AM PST US
> From: Tim Olson <Tim@MyRv10.com>
> Subject: RV14-List: Thanks for the list Matt! - Plans Rev. pg 11-03
>
>
> Thanks to Matt for setting up an RV-14 email list. Those of you
> on this list (maybe very few at this point) who know me, know
> that I prefer email based lists...the messages pop into
> your inbox where you can address them quickly. It makes for
> a speedy way to pass along info.
>
> I'm builder 140032, and got my kit 12/21/2012. So far I'm done
> with section 11 and 1/2 way through 12 almost. I find that the
> RV-14 plans in some cases so far, are perhaps a little more
> vague than the RV-10, although the kit itself has some nice
> little improvements. In the section on countersinking the spar
> in section 11, they do show the max depth and width of the
> countersinks you create, but, they don't go into detail as to
> what the ultimate goal of the countersunk hole will be. In the
> -10 plans they have you test dimple a scrap of aluminum so that
> you get the depth to a workable depth for assembly later.
> Anyway, it does take a little interpreting and reading ahead
> if you're a 1st time builder. I have a website regarding
> my RV-10 at http://www.MyRV10.com, and although I still update
> it, it won't be changing drastically in the future. I also
> have one set up for the RV-14 at http://www.MyRV14.com that
> I will use to document the build, but I will not be spending
> nearly the time writing as I did on the other plane. I probably
> have as much time into writing as building on that kit.
>
> I did have one plans correction I found, and Van's has already
> changed it on their plans, but it somehow didn't make it into
> my plans when they shipped just a few weeks ago. On page 11-03
> the "AFT / UP / Inboard" label was wrong in 2 diagrams, but
> they have it changed now to "FWD / UP / Inboard", so they were
> already on it. I'm sure we'll find more changes as we go
> through the build.
>
> I just wanted to make a quick introduction and let anyone
> else who signed on the list know that I'll be monitoring
> the list, so email here when you run into questions or issues.
>
> Tim
> RV-10 N104CD
>
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 07:00:26 AM PST US
> From: Dave Saylor <dave.saylor.aircrafters@gmail.com>
> Subject: Re: RV14-List: Thanks for the list Matt! - Plans Rev. pg 11-03
>
> Hi Tim, can't wait to see your progress.
>
> Anyone else wish there was a 540 option?
>
> Dave Saylor
> 831-750-0284 CL
>
>
> On Mon, Jan 7, 2013 at 6:26 AM, Tim Olson <Tim@myrv10.com> wrote:
>
>>
>> Thanks to Matt for setting up an RV-14 email list. Those of you
>> on this list (maybe very few at this point) who know me, know
>> that I prefer email based lists...the messages pop into
>> your inbox where you can address them quickly. It makes for
>> a speedy way to pass along info.
>>
>> I'm builder 140032, and got my kit 12/21/2012. So far I'm done
>> with section 11 and 1/2 way through 12 almost. I find that the
>> RV-14 plans in some cases so far, are perhaps a little more
>> vague than the RV-10, although the kit itself has some nice
>> little improvements. In the section on countersinking the spar
>> in section 11, they do show the max depth and width of the
>> countersinks you create, but, they don't go into detail as to
>> what the ultimate goal of the countersunk hole will be. In the
>> -10 plans they have you test dimple a scrap of aluminum so that
>> you get the depth to a workable depth for assembly later.
>> Anyway, it does take a little interpreting and reading ahead
>> if you're a 1st time builder. I have a website regarding
>> my RV-10 at http://www.MyRV10.com, and although I still update
>> it, it won't be changing drastically in the future. I also
>> have one set up for the RV-14 at http://www.MyRV14.com that
>> I will use to document the build, but I will not be spending
>> nearly the time writing as I did on the other plane. I probably
>> have as much time into writing as building on that kit.
>>
>> I did have one plans correction I found, and Van's has already
>> changed it on their plans, but it somehow didn't make it into
>> my plans when they shipped just a few weeks ago. On page 11-03
>> the "AFT / UP / Inboard" label was wrong in 2 diagrams, but
>> they have it changed now to "FWD / UP / Inboard", so they were
>> already on it. I'm sure we'll find more changes as we go
>> through the build.
>>
>> I just wanted to make a quick introduction and let anyone
>> else who signed on the list know that I'll be monitoring
>> the list, so email here when you run into questions or issues.
>>
>> Tim
>> RV-10 N104CD
>
>
>
>
>
>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV14-List Digest: 2 Msgs - 01/07/13 |
Hi gang.
I'm Gordon, in Lawrenceville, Ga. Been working on my 14 wing kit for a week.
Spar is done, rib prep in progress.
When not doing that, I fly my Bcker Jngmann biplane, and some corporate jets.
Sent from me
On Jan 8, 2013, at 2:57 AM, RV14-List Digest Server <rv14-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete RV14-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the RV14-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 13-01-07&Archive=RV14
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 13-01-07&Archive=RV14
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> RV14-List Digest Archive
> ---
> Total Messages Posted Mon 01/07/13: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:26 AM - Thanks for the list Matt! - Plans Rev. pg 11-03 (Tim Olson)
> 2. 07:00 AM - Re: Thanks for the list Matt! - Plans Rev. pg 11-03 (Dave
Saylor)
>
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 06:26:14 AM PST US
> From: Tim Olson <Tim@MyRv10.com>
> Subject: RV14-List: Thanks for the list Matt! - Plans Rev. pg 11-03
>
>
> Thanks to Matt for setting up an RV-14 email list. Those of you
> on this list (maybe very few at this point) who know me, know
> that I prefer email based lists...the messages pop into
> your inbox where you can address them quickly. It makes for
> a speedy way to pass along info.
>
> I'm builder 140032, and got my kit 12/21/2012. So far I'm done
> with section 11 and 1/2 way through 12 almost. I find that the
> RV-14 plans in some cases so far, are perhaps a little more
> vague than the RV-10, although the kit itself has some nice
> little improvements. In the section on countersinking the spar
> in section 11, they do show the max depth and width of the
> countersinks you create, but, they don't go into detail as to
> what the ultimate goal of the countersunk hole will be. In the
> -10 plans they have you test dimple a scrap of aluminum so that
> you get the depth to a workable depth for assembly later.
> Anyway, it does take a little interpreting and reading ahead
> if you're a 1st time builder. I have a website regarding
> my RV-10 at http://www.MyRV10.com, and although I still update
> it, it won't be changing drastically in the future. I also
> have one set up for the RV-14 at http://www.MyRV14.com that
> I will use to document the build, but I will not be spending
> nearly the time writing as I did on the other plane. I probably
> have as much time into writing as building on that kit.
>
> I did have one plans correction I found, and Van's has already
> changed it on their plans, but it somehow didn't make it into
> my plans when they shipped just a few weeks ago. On page 11-03
> the "AFT / UP / Inboard" label was wrong in 2 diagrams, but
> they have it changed now to "FWD / UP / Inboard", so they were
> already on it. I'm sure we'll find more changes as we go
> through the build.
>
> I just wanted to make a quick introduction and let anyone
> else who signed on the list know that I'll be monitoring
> the list, so email here when you run into questions or issues.
>
> Tim
> RV-10 N104CD
>
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 07:00:26 AM PST US
> From: Dave Saylor <dave.saylor.aircrafters@gmail.com>
> Subject: Re: RV14-List: Thanks for the list Matt! - Plans Rev. pg 11-03
>
> Hi Tim, can't wait to see your progress.
>
> Anyone else wish there was a 540 option?
>
> Dave Saylor
> 831-750-0284 CL
>
>
> On Mon, Jan 7, 2013 at 6:26 AM, Tim Olson <Tim@myrv10.com> wrote:
>
>>
>> Thanks to Matt for setting up an RV-14 email list. Those of you
>> on this list (maybe very few at this point) who know me, know
>> that I prefer email based lists...the messages pop into
>> your inbox where you can address them quickly. It makes for
>> a speedy way to pass along info.
>>
>> I'm builder 140032, and got my kit 12/21/2012. So far I'm done
>> with section 11 and 1/2 way through 12 almost. I find that the
>> RV-14 plans in some cases so far, are perhaps a little more
>> vague than the RV-10, although the kit itself has some nice
>> little improvements. In the section on countersinking the spar
>> in section 11, they do show the max depth and width of the
>> countersinks you create, but, they don't go into detail as to
>> what the ultimate goal of the countersunk hole will be. In the
>> -10 plans they have you test dimple a scrap of aluminum so that
>> you get the depth to a workable depth for assembly later.
>> Anyway, it does take a little interpreting and reading ahead
>> if you're a 1st time builder. I have a website regarding
>> my RV-10 at http://www.MyRV10.com, and although I still update
>> it, it won't be changing drastically in the future. I also
>> have one set up for the RV-14 at http://www.MyRV14.com that
>> I will use to document the build, but I will not be spending
>> nearly the time writing as I did on the other plane. I probably
>> have as much time into writing as building on that kit.
>>
>> I did have one plans correction I found, and Van's has already
>> changed it on their plans, but it somehow didn't make it into
>> my plans when they shipped just a few weeks ago. On page 11-03
>> the "AFT / UP / Inboard" label was wrong in 2 diagrams, but
>> they have it changed now to "FWD / UP / Inboard", so they were
>> already on it. I'm sure we'll find more changes as we go
>> through the build.
>>
>> I just wanted to make a quick introduction and let anyone
>> else who signed on the list know that I'll be monitoring
>> the list, so email here when you run into questions or issues.
>>
>> Tim
>> RV-10 N104CD
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|