Today's Message Index:
----------------------
1. 10:13 AM - Re: Help with 3 blade Catto Prop on RV3 (rob ray)
2. 10:24 AM - Re: Help with 3 blade Catto Prop on RV3 (Trudy Ettelson)
3. 11:26 AM - Re: Help with 3 blade Catto Prop on RV3 (Cy Galley)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Help with 3 blade Catto Prop on RV3 |
--> RV3-List message posted by: rob ray <smokyray@yahoo.com>
Hi Rick, I have run two different Catto props on my 150 HP RV4 and my hangar neighbor
runs a Catto 3 blade on his 160HP RV4. I run a 68X72 two blade and I have
a carbureted, electronic ignition 0-320 7.4:1 pistons. I wanted 2700 rpm max
at SL/full throttle. My 68/72 is spot on. My neighbor with the three blade just
had Craig make him a new 3 blade as the original 3 blade was underpitched.
The new one is perfect for 160HP. Have Craig reference John Cobbs newest prop
for his RV4, it should be close for your airplane as well....
Rob Ray
Rick Fogerson <rickf@cableone.net> wrote:
--> RV3-List message posted by: "Rick Fogerson"
I am ordering a 3 blade Catto prop for my RV3 with 0320 engine. The engine was
a rebuilt by AeroSport with dual E.I. and Air Flow Performance fuel injection.
I'm not sure what to tell Catto in terms of:
1) max performance HP
2) max RPM at say 8000 ft.
3) max airspeed at say 8000ft.
4) other useful info.
in order for him to carve the prop. Any help would be greatly appreciated.
Thanks,
Rick Fogerson
finishing wiring
Boise, ID
---------------------------------
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Help with 3 blade Catto Prop on RV3 |
--> RV3-List message posted by: "Trudy Ettelson" <tettelso@socal.devry.edu>
** Reply Requested When Convenient **
For about a month now, I've been receiving a blind copy of all your
rv3-matronics.com emails, and I'm just an English professor at DeVry
University in Pomona, CA. Kindly remove me from that list if you can.
I don't know how it happened, but I must be on some kind of list.
Thanks for your help.l
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Help with 3 blade Catto Prop on RV3 |
--> RV3-List message posted by: "Cy Galley" <cgalley@qcbc.org>
Just Scroll and to the subscription link. I have bolded it so you can find it!
----- Original Message -----
From: "Trudy Ettelson" <tettelso@socal.devry.edu>
Subject: Re: RV3-List: Help with 3 blade Catto Prop on RV3
> --> RV3-List message posted by: "Trudy Ettelson" <tettelso@socal.devry.edu>
>
> ** Reply Requested When Convenient **
>
> For about a month now, I've been receiving a blind copy of all your
> rv3-matronics.com emails, and I'm just an English professor at DeVry
> University in Pomona, CA. Kindly remove me from that list if you can.
> I don't know how it happened, but I must be on some kind of list.
> Thanks for your help.l
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|