---------------------------------------------------------- RV3-List Digest Archive --- Total Messages Posted Fri 01/09/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:21 AM - Re: RV-3 Alieron bracket (Bruce Stewart) 2. 01:28 AM - Re: RV-3 Alieron bracket (Bruce Stewart) ________________________________ Message 1 _____________________________________ Time: 01:21:40 AM PST US rv-list@matronics.com From: Bruce Stewart Subject: Re: RV3-List: RV-3 Alieron bracket --> RV3-List message posted by: Bruce Stewart Lee, I've had a look at the drawings and the photos, seems to me you have just drilled a hole in the wrong place maybe...... Can you post some more photos that arn't so close and more general views? Bruce Downunder. At 10:37 PM 8/01/2004 -0500, Leesafur@aol.com wrote: >--> RV3-List message posted by: Leesafur@aol.com > >I have a clearance problem with the inboard a-304 aileron rib and the >outboard AN-3 bolt for the a-305 aileron bracket. I have built these parts and >drilled the holes exactly to the plans please take a look at the pictures >that I >have and let me know what you think and if you built these bugger can you >let me >know what you did because I haven=E2=80=99t a clue. Please note the bolt >holes are not >final drilled to 3/16 yet. > >http://www.angelfire.com/mech/rv-3/aileron.html > > >Lee >Anoka MN >RV-3 wing > > ________________________________ Message 2 _____________________________________ Time: 01:28:58 AM PST US RV-3@yahoogroups.com, rv-list@matronics.com From: Bruce Stewart Subject: Re: RV3-List: RV-3 Alieron bracket --> RV3-List message posted by: Bruce Stewart Second take, yeah I see the problem! mmmmmmmm ummm errrrr Haven't a clue.........yet. Bruce >Lee, > >I've had a look at the drawings and the photos, seems to me you >have just drilled a hole in the wrong place maybe...... > >Can you post some more photos that arn't so close and more general >views? > >Bruce > >Downunder. > > >At 10:37 PM 8/01/2004 -0500, Leesafur@aol.com wrote: >>--> RV3-List message posted by: Leesafur@aol.com >> >>I have a clearance problem with the inboard a-304 aileron rib and the >>outboard AN-3 bolt for the a-305 aileron bracket. I have built these parts and >>drilled the holes exactly to the plans please take a look at the pictures >>that I >>have and let me know what you think and if you built these bugger can you >>let me >>know what you did because I haven=E2=80=99t a clue. Please note the bolt >>holes are not >>final drilled to 3/16 yet. >> >>http://www.angelfire.com/mech/rv-3/aileron.html >> >> >>Lee >>Anoka MN >>RV-3 wing >> >>