Today's Message Index:
----------------------
1. 03:53 AM - Airtech Wingtip Lens Kit (Leesafur@aol.com)
2. 06:03 AM - Re: Airtech Wingtip Lens Kit (rob ray)
3. 06:17 AM - Re: Sensenich propellors (rob ray)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Airtech Wingtip Lens Kit |
--> RV3-List message posted by: Leesafur@aol.com
Does the Airtech wingtip lens kit from Vans fit the RV-3 wingtip?
Lee
Anoka MN
RV-3 wing
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Airtech Wingtip Lens Kit |
--> RV3-List message posted by: rob ray <smokyray@yahoo.com>
Yes, with small modifications for the attachment screws.
Leesafur@aol.com wrote:--> RV3-List message posted by: Leesafur@aol.com
Does the Airtech wingtip lens kit from Vans fit the RV-3 wingtip?
Lee
Anoka MN
RV-3 wing
====================================
---------------------------------
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Sensenich propellors |
--> RV3-List message posted by: rob ray <smokyray@yahoo.com>
How do you like the prop now? After years of trashing wood props in rain, I am
looking at the sensy or really taking the plunge with an MT electric...
RR
Johnny Johnson <Johnny@wiktel.com> wrote:
--> RV3-List message posted by: "Johnny Johnson"
It's the legal 70 x 81 cut off 1" and repitched 2", the work was done per
Sensenich guidelines by a prop shop in Boise, ID. 81" was not enough pitch,
and the engine was 150 hp then. 69 x 83 seems about right for 160 hp.
Thanks for pointing out about the perils--very real perils--of severely
repitched Piper/Cessna/et al props... that is a no-no of the most extreme
nature, it is true. I should have been more specific in the original post.
Johnny Johnson
-----Original Message-----
From: owner-rv3-list-server@matronics.com
[mailto:owner-rv3-list-server@matronics.com] On Behalf Of Fred Bauer Jr
Subject: RV3-List: Sensenich propellors
--> RV3-List message posted by: "Fred Bauer Jr"
On a recent post [JJ] describing an RV3 with a 160 HP Lycoming we notice
that the Sensenich propeller was a 69 dia X 83 pitch.
We do not see where Sensenich and Van's offers that combination propeller,
the RV3 propeller Van's recommends is the Sensenich 70 dia X 81 pitch.
If the 69X83 Sensenich is a cut down 74DM propeller or another cut down
version of the Sensenich
BE CAREFUL !!!!!!!!!!!!!
John Thorp, the T-18 designer, went through a very detailed and complete
vibration analysis
after several fatal accidents with his T-18 design which involved using the
cut down propellers.
His conclusion was that the cut down propellers will fail!
NOT IF,
THEY WILL FAIL
I have never had a propeller fail on me so I may not know what I am talking
about but I can read and I can understand what I have read.
---------------------------------
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|