Today's Message Index:
----------------------
1. 02:17 PM - hole for wing tie down (Leesafur@aol.com)
2. 04:46 PM - Re: hole for wing tie down (jnbolding1)
3. 04:55 PM - Re: hole for wing tie down (Leesafur@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | hole for wing tie down |
--> RV3-List message posted by: Leesafur@aol.com
Dear RV Builders:
For those of you that have built an older RV can you tell me if you have
had any problems with the hole in the spar for the wing tie down; like
cracking? I had a friend of mine come check my work although not an RV
builder he is
a AP and works on much bigger aircraft. He was concerned about the hole in
the
spar flange.
What do you think? http://www.angelfire.com/mech/rv-3/pics.html
Lee
Anoka MN
RV-3 wing
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: hole for wing tie down |
--> RV3-List message posted by: "jnbolding1" <jnbolding1@mail.ev1.net>
For those of you that have built an older RV can you tell me if you have
>had any problems with the hole in the spar for the wing tie down; like
>cracking? I had a friend of mine come check my work although not an RV
>builder he is
>a AP and works on much bigger aircraft. He was concerned about the hole in
>the
>spar flange.
>What do you think?
With me its a non issue, my 3 has almost 2000 hrs and 25 yrs, with a lot of aerobatics,
but I'll defer to those that have put some REAL time on theirs. Had
a wing skin off to do the spar mod and had no structural issues to deal with.
John Bolding
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: hole for wing tie down |
--> RV3-List message posted by: Leesafur@aol.com
Thanks John that's what I wanted to hear. I also called Vans after I posted
my message and they said its a non factor the flange is there to fasten the
skin not carry the load.
Lee
Anoka MN
RV-3 wing
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|