Today's Message Index:
----------------------
1. 10:29 AM - Re: RV-3 cowl , 4 inch prop extension (Randy Lervold)
2. 09:19 PM - MT Propeller offer for RV-3 (LessDragProd@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV-3 cowl , 4 inch prop extension |
--> RV3-List message posted by: "Randy Lervold" <randy@romeolima.com>
Rob & Rick, the cowls all now have the intake scoop built in. I'm pretty
sure they are no longer available any other way unless you special ordered
it from the mfr, which is possible.
Randy Lervold
----- Original Message -----
From: "rob ray" <smokyray@yahoo.com>
Subject: Re: RV3-List: RV-3 cowl , 4 inch prop extension
> --> RV3-List message posted by: rob ray <smokyray@yahoo.com>
>
> The new RV3 and RV4 cowls are pre-preg glass set up for C/S props and a
separate scoop you order from van's based on your induction system and glass
on yourself. Prior to this there were 2 cowls sold, a 4" ext required for
the FP cowl and none on the C/S cowl. Since 95, all of the cowls are C/S
capable. Call Van's for more info....
>
> Rob Ray
> (old, long vinylester cowl, 150 HP fixed pitch)
>
> Rick Fogerson <rickf@cableone.net> wrote:
> --> RV3-List message posted by: "Rick Fogerson"
>
> I'm building an RV3 with an 0320 and Airflow Performance Fuel Injection
system. Can anyone tell me if the RV3 cowl comes with a scoop already built
into the cowl or do you buy a scoop and install it yourself. If you do buy a
separate scoop, which scoop and FAB would you order for an Airflow
Performance Fuel Injection system mounted vertically like the carb.
> Thanks, Rick Fogerson
>
>
> ---------------------------------
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | MT Propeller offer for RV-3 |
--> RV3-List message posted by: LessDragProd@aol.com
Hi Rob,
I believe I have enough people interested in buying their MT Propeller.
It looks like it's time to see how many people are really ready to buy now.
I have you down as interested in the MTV-17-C/178-59 electric CS 2 blade
propeller. Expected deliver to occur 18 weeks after receipt of order.
Delivery direct to you, but method still to be determined. (I'm still
working with MT on how to do this easily for the customer. Some spinner assembly
may be required.)
This uses a 12" diameter spinner. I have a 3 3/8" dimension from the front
of your cowl to the propeller hub mounting surface on the ring gear.
I am not asking for you to send any money at this time. I want to make
certain I have enough people serious about ordering their propeller before I ask
for payment.
(MT Propeller requires full payment at the time of placing the order to get
this price.)
Are you willing, and able, to provide the $7,350 payment necessary to order
your propeller at this time.
Jim Ayers
Less Drag Products, Inc.
MT Propeller Certified Assembly Facility
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|