---------------------------------------------------------- RV3-List Digest Archive --- Total Messages Posted Sat 12/10/05: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:39 AM - Re: Engine Vibration Mounts (rob ray) 2. 12:12 PM - [ Scott Lewis ] : New Email List Photo Share Available! (Email List Photo Shares) 3. 01:29 PM - Re: Engine Vibration Mounts (Jim Oke) ________________________________ Message 1 _____________________________________ Time: 11:39:28 AM PST US From: rob ray Subject: Re: RV3-List: Engine Vibration Mounts --> RV3-List message posted by: rob ray Measure the holes and get them from Aircraft Spruce... www.aircraftspruce.com good luck! Rob Ray Leesafur@aol.com wrote: --> RV3-List message posted by: Leesafur@aol.com Can anybody help me find which engine mounts I need. I have the older dynafocal engine mount with the smaller cups and Vans standard Vibration mounts are to big also it's the only size they sell. Thanks Lee Anoka MN RV-3 --------------------------------- ________________________________ Message 2 _____________________________________ Time: 12:12:02 PM PST US Subject: RV3-List: [ Scott Lewis ] : New Email List Photo Share Available! From: Email List Photo Shares --> RV3-List message posted by: Email List Photo Shares A new Email List Photo Share is available: Poster: Scott Lewis Lists: RV-List,RV3-List,RV4-List,RV6-List,RV7-List,RV8-List,RV9-List,RV10-List,Rocket-List Subject: PiRep - Deluxe Fuel Caps http://www.matronics.com/photoshare/rv10@tpg.com.au.12.10.2005/index.html o Main Photo Share Index http://www.matronics.com/photoshare o Submitting a Photo Share If you wish to submit a Photo Share of your own, please include the following information along with your email message and files: 1) Email List or Lists that they are related to: 2) Your Full Name: 3) Your Email Address: 4) One line Subject description: 5) Multi-line, multi-paragraph description of topic: 6) One-line Description of each photo or file: Email the information above and your files and photos to: pictures@matronics.com ________________________________ Message 3 _____________________________________ Time: 01:29:20 PM PST US From: Jim Oke Subject: Re: RV3-List: Engine Vibration Mounts --> RV3-List message posted by: Jim Oke Lee: I have vague memories of encountering this problem years ago when I was finishing my RV-3. My recall ordering a "standard" set of Lord of Lord mounts from somewhere and being puzzled when they simply would not fit. I contacted Vans and they said that some (perhaps it was all) RV-3 dynafocal mounts were made using "small" size cup holders for the engine mounts. I eventually located a set that worked - I think the usual application was for a Piper Tri-Pacer or similar aircraft. I wish I could be more precise but it is getting on to 15 years ago that I was shopping for engine mounts. Measure your your mount and ask for "small" size engine mounts would be the best advice I think. Vans might be able to point you at the right size mount as well. Good luck and happy building! Jim Oke Winnipeg, MB RV-3, C-FIZM Leesafur@aol.com wrote: >--> RV3-List message posted by: Leesafur@aol.com > >Can anybody help me find which engine mounts I need. I have the older >dynafocal engine mount with the smaller cups and Vans standard Vibration mounts are >to big also it's the only size they sell. >Thanks > > >Lee >Anoka MN >RV-3 > > >