Today's Message Index:
----------------------
1. 01:35 PM - Aileron mounting template (PGLong@aol.com)
2. 03:21 PM - Re: Aileron mounting template (Kenneth Beene)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Aileron mounting template |
--> RV4-List message posted by: PGLong@aol.com
Looking for some more advice. Being the 3rd owner of an RV 4 kit, I don't
have access to the original shipping container that had the aileron / flap
mounting template marked on it. I'll be ready to mount them before long and
am wondering if this jig is really necessary? If it is, could someone make a
paper template from theirs and mail it to me? Or, can I get one of these from
Van's? Other ideas?
Pat Long
Bay City, Michigan
(989)684-0581
Working on an RV-4
Email: PGLong@aol.com
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Aileron mounting template |
--> RV4-List message posted by: "Kenneth Beene" <kbeene@citilink.com>
>Looking for some more advice. Being the 3rd owner of an RV 4 kit, I
don't
>have access to the original shipping container that had the aileron /
flap
>mounting template marked on it.
Pat,
I think it can be done without them put they do work very well. I build
my RV-6 with ones that I cut from the container but not very carefully.
I just finished the wings on my RV-4 and used some quality templates I
borrowed from another RV-6 builder. I got a much better fit with the
good templates and the installation is easier also.
If you can't borrow some templates from a local builder, email me and I
will try to copy them to paper. You can use the -4 or the -6 template
as they are the same.
Ken
http://www.mninter.net/~kbeene/
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|