---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Wed 01/01/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:35 PM - Aileron mounting template (PGLong@aol.com) 2. 03:21 PM - Re: Aileron mounting template (Kenneth Beene) ________________________________ Message 1 _____________________________________ Time: 01:35:05 PM PST US From: PGLong@aol.com Subject: RV4-List: Aileron mounting template --> RV4-List message posted by: PGLong@aol.com Looking for some more advice. Being the 3rd owner of an RV 4 kit, I don't have access to the original shipping container that had the aileron / flap mounting template marked on it. I'll be ready to mount them before long and am wondering if this jig is really necessary? If it is, could someone make a paper template from theirs and mail it to me? Or, can I get one of these from Van's? Other ideas? Pat Long Bay City, Michigan (989)684-0581 Working on an RV-4 Email: PGLong@aol.com ________________________________ Message 2 _____________________________________ Time: 03:21:22 PM PST US From: "Kenneth Beene" Subject: RE: RV4-List: Aileron mounting template --> RV4-List message posted by: "Kenneth Beene" >Looking for some more advice. Being the 3rd owner of an RV 4 kit, I don't >have access to the original shipping container that had the aileron / flap >mounting template marked on it. Pat, I think it can be done without them put they do work very well. I build my RV-6 with ones that I cut from the container but not very carefully. I just finished the wings on my RV-4 and used some quality templates I borrowed from another RV-6 builder. I got a much better fit with the good templates and the installation is easier also. If you can't borrow some templates from a local builder, email me and I will try to copy them to paper. You can use the -4 or the -6 template as they are the same. Ken http://www.mninter.net/~kbeene/