---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Thu 10/23/03: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:45 AM - Dynon Magnetometer Location (N223RV@aol.com) 2. 07:05 AM - Re: Dynon Magnetometer Location (rob ray) 3. 07:39 PM - Autogas (Steve Mullins) 4. 07:56 PM - Re: Dynon Magnetometer Location (Don Diehl) ________________________________ Message 1 _____________________________________ Time: 06:45:44 AM PST US From: N223RV@aol.com Subject: RV4-List: Dynon Magnetometer Location --> RV4-List message posted by: N223RV@aol.com Has anyone installed a Dynon magnetometer in a -4? If so, where is a good location that seems to work? I'm having trouble finding a good spot that is away from ferrous material. The only place I can find is way back in the hell hole, but I still don't have 2' from any ferrous material. Any suggestions? -Mike Kraus N223RV flying ________________________________ Message 2 _____________________________________ Time: 07:05:56 AM PST US From: rob ray Subject: Re: RV4-List: Dynon Magnetometer Location --> RV4-List message posted by: rob ray Mike. I saw one in Waco this year with the remote compass sender under the front seat in front of the spar. He built a small mount for it and hollowed out his seat cushion accordingly while running the wire under the floorboard... RR N223RV@aol.com wrote: --> RV4-List message posted by: N223RV@aol.com Has anyone installed a Dynon magnetometer in a -4? If so, where is a good location that seems to work? I'm having trouble finding a good spot that is away from ferrous material. The only place I can find is way back in the hell hole, but I still don't have 2' from any ferrous material. Any suggestions? -Mike Kraus N223RV flying --------------------------------- ________________________________ Message 3 _____________________________________ Time: 07:39:22 PM PST US From: "Steve Mullins" Subject: RV4-List: Autogas --> RV4-List message posted by: "Steve Mullins" I want to thank you all for the many great suggestions regarding my mogas problems. I am pretty sure vapor lock is the source. Any ideas about how to better protect/insulate the mechanical fuel pump on my 0-290 from heat? I have two blast tubes routing air to it. Are there materials that can be used to fabricate some sort of insulating 'cocoon'around the pump? ________________________________ Message 4 _____________________________________ Time: 07:56:05 PM PST US Subject: Re: RV4-List: Dynon Magnetometer Location From: Don Diehl --> RV4-List message posted by: Don Diehl > Has anyone installed a Dynon magnetometer in a -4? If so, where is a > good location that seems to work? I put mine on F-419, the shelf under the leading edge of the vertical stab. It works like a champ. No response on the magnetic display to full elevator excursion. Don Diehl Bremerton WA N28EW Do not archive.