Today's Message Index:
----------------------
1. 06:47 PM - CANOPY FAIRING (RV4WGH@aol.com)
2. 07:16 PM - Re: CANOPY FAIRING (arvil@bellsouth.net)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> RV4-List message posted by: RV4WGH@aol.com
Just finished making the fiberglass fairing for the front of the canopy.
What is the preferred method of fastening it on? Epoxy, Rivets, Screws?
Thanks,
Wally Hunt
Rockford, IL
Finishing Kit
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: CANOPY FAIRING |
--> RV4-List message posted by: arvil@bellsouth.net
Wally,
There are several ways One is to apply strips of fiber glass after you have
the canopy fitted after it has dryed and sanded smooth it can be drilled
about every 2 " with number 30 drill , then counter sinked for Vans CS-4-4
rivet , or number 6 screews , they can be filed or another thin layer of
glass layed over the rivets and sanded, If you preferred the screews can be
left uncovered,
Arvil
RV4WGH@aol.com wrote:
> --> RV4-List message posted by: RV4WGH@aol.com
>
> Just finished making the fiberglass fairing for the front of the canopy.
> What is the preferred method of fastening it on? Epoxy, Rivets, Screws?
>
> Thanks,
>
> Wally Hunt
> Rockford, IL
> Finishing Kit
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|