----------------------------------------------------------
                           RV4-List Digest Archive
                                      ---
                     Total Messages Posted Tue 01/18/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:47 PM - CANOPY FAIRING  (RV4WGH@aol.com)
     2. 07:16 PM - Re: CANOPY FAIRING  (arvil@bellsouth.net)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:47:23 PM PST US
From: RV4WGH@aol.com
Subject: RV4-List: CANOPY FAIRING

--> RV4-List message posted by: RV4WGH@aol.com

Just finished making the fiberglass fairing for the front of the  canopy.  
What is the preferred method of fastening it on?  Epoxy,  Rivets, Screws?

Thanks,

Wally Hunt
Rockford, IL
Finishing Kit






________________________________  Message 2  _____________________________________


Time: 07:16:49 PM PST US
From: arvil@bellsouth.net
Subject: Re: RV4-List: CANOPY FAIRING

--> RV4-List message posted by: arvil@bellsouth.net

Wally,
There are several ways  One is to apply strips of fiber glass after you have
the canopy fitted after it has dryed and sanded smooth it can be drilled
about every 2 " with number 30 drill , then counter sinked for Vans CS-4-4
rivet ,  or number 6 screews , they can be filed or another thin layer of
glass layed over the rivets and sanded, If  you  preferred the screews can be
left uncovered,

Arvil


RV4WGH@aol.com wrote:

> --> RV4-List message posted by: RV4WGH@aol.com
>
> Just finished making the fiberglass fairing for the front of the  canopy.
> What is the preferred method of fastening it on?  Epoxy,  Rivets, Screws?
>
> Thanks,
>
> Wally Hunt
> Rockford, IL
> Finishing Kit
>