---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Fri 09/09/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:40 PM - RV-4 CABIN HEAT (RV4WGH@aol.com) 2. 06:56 PM - Re: RV-4 CABIN HEAT (mbick) ________________________________ Message 1 _____________________________________ Time: 03:40:55 PM PST US From: RV4WGH@aol.com Subject: RV4-List: RV-4 CABIN HEAT --> RV4-List message posted by: RV4WGH@aol.com Have any of you RV-4 builders put the cabin heat valve on the "horizontal" portion of the firewall? I plan to have a scat duct go down the center and pass the battery on the right side, back to the rear seat. Mounting on that portion of the firewall would be a more direct route. Regards, Wally Hunt Rockford, IL RV-4 Finishing Kit ________________________________ Message 2 _____________________________________ Time: 06:56:13 PM PST US From: "mbick" Subject: RE: RV4-List: RV-4 CABIN HEAT --> RV4-List message posted by: "mbick" I did exactly as you describe and it works fine -----Original Message----- From: owner-rv4-list-server@matronics.com [mailto:owner-rv4-list-server@matronics.com] On Behalf Of RV4WGH@aol.com Subject: RV4-List: RV-4 CABIN HEAT --> RV4-List message posted by: RV4WGH@aol.com Have any of you RV-4 builders put the cabin heat valve on the "horizontal" portion of the firewall? I plan to have a scat duct go down the center and pass the battery on the right side, back to the rear seat. Mounting on that portion of the firewall would be a more direct route. Regards, Wally Hunt Rockford, IL RV-4 Finishing Kit