Today's Message Index:
----------------------
1. 05:41 AM - Re: RV4-List Digest: 1 Msgs - 10/20/05 (rob ray)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV4-List Digest: 1 Msgs - 10/20/05 |
--> RV4-List message posted by: rob ray <smokyray@yahoo.com>
Wally, I mounted my Throttle on the lower longeron as well and used an A/C Spruce
cable 50" long and snaked it through the firewall. My mixture is mounted on
the side on a separate vernier control to keep the throttle quadrant with one
lever, like a real fighter...ha!
RR
RV4-List Digest Server <rv4-list-digest@matronics.com> wrote:
*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete RV4-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the RV4-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/rv4-list/Digest.RV4-List.2005-10-20.html
Text Version:
http://www.matronics.com/digest/rv4-list/Digest.RV4-List.2005-10-20.txt
================================================
EMail Version of Today's List Digest Archive
================================================
RV4-List Digest Archive
---
Total Messages Posted Thu 10/20/05: 1
Today's Message Index:
----------------------
1. 07:21 PM - THROTTLE AND MIXTURE CONTROLS (RV4WGH@aol.com)
________________________________ Message 1 _____________________________________
Time: 07:21:09 PM PST US
From: RV4WGH@aol.com
Subject: RV4-List: THROTTLE AND MIXTURE CONTROLS
--> RV4-List message posted by: RV4WGH@aol.com
I have two of Van's controls that are 55 inches long, as listed in the
catalog. Thinking these must be for use if you place the control on top of the
longeron per the drawings. I am using a quadrant that will be perhaps a foot
below the longeron. From that location, these seem to be approximately 7
inches too long.
Question: What length have those of you who located the throttle and
mixture on a quadrant in the lower location using?
Happy Flying Safely,
Wally Hunt
RV-4 Finishing Kit
---------------------------------
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|