---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Wed 12/27/06: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:02 AM - Re: RV4-List Digest: 1 Msgs - 12/25/06 (Rob Ray) 2. 07:51 AM - Re: Re: RV4-List Digest: 1 Msgs - 12/25/06 (Jerry Grimmonpre) 3. 10:04 AM - Re: Re: RV4-List Digest: 1 Msgs - 12/25/06 (Dwayne Cowles) 4. 02:16 PM - Re: Re: RV4-List Digest: 1 Msgs - 12/25/06 (Rob Ray) 5. 02:19 PM - Re: Re: RV4-List Digest: 1 Msgs - 12/25/06 (Rob Ray) 6. 02:23 PM - Re: Re: RV4-List Digest: 1 Msgs - 12/25/06 (DFCPAC@aol.com) ________________________________ Message 1 _____________________________________ Time: 07:02:25 AM PST US From: Rob Ray Subject: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 Brad, having bought the same setup when I built my -4, I stared at it like a pig looking at a wristwatch for a few days. I tossed the whole kit back in the box and went down to the Home Depot Aviation dept. I grabbed some cable clamps and attached them with some small tabs I made from angle aluminum directly to my rudder cables next to my rear passenger footwells. Works great and are removable. The Van's RR pedal kit requires cutting a long hole in the floorboard next to my leg in the front seat. I didn't like it. I like my setup mucho better. I can send you photos if you like... Rob Ray RV4-List Digest Server wrote: * ================================================= Online Versions of Today's List Digest Archive ================================================= Today's complete RV4-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV4-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 06-12-25&Archive=RV4 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 06-12-25&Archive=RV4 =============================================== EMail Version of Today's List Digest Archive =============================================== ---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Mon 12/25/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:52 PM - RV4 rear rudder pedal installation (Bradford Sharp) ________________________________ Message 1 _____________________________________ Time: 02:52:52 PM PST US From: Bradford Sharp Subject: RV4-List: RV4 rear rudder pedal installation MERRY CHRISTMAS, HAPPY NEW YEAR, I bought the rear rudder pedal kit for the RV4 from Vans. The instructions are not as clear as I had hoped. I really would appreciate any comments on the installation and some photos showing the completed task. And any other comments you'd care to mention. Send to my e-mail at: saberpilot@earthlink.net Cheers, Brad Sharp __________________________________________________ ________________________________ Message 2 _____________________________________ Time: 07:51:44 AM PST US From: "Jerry Grimmonpre" Subject: Re: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 Hi Rob ... Thanks for your word description of your rudder pedal fabrication. You sound very resourceful. I'm working on the same pedal install as well. Could you please copy me photo's when you send to Brad? Many thanks ... Jerry Grimmonpre' Huntley IL RV4 flying ----- Original Message ----- From: Rob Ray To: rv4-list@matronics.com Sent: Wednesday, December 27, 2006 9:01 AM Subject: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 Brad, having bought the same setup when I built my -4, I stared at it like a pig looking at a wristwatch for a few days. I tossed the whole kit back in the box and went down to the Home Depot Aviation dept. I grabbed some cable clamps and attached them with some small tabs I made from angle aluminum directly to my rudder cables next to my rear passenger footwells. Works great and are removable. The Van's RR pedal kit requires cutting a long hole in the floorboard next to my leg in the front seat. I didn't like it. I like my setup mucho better. I can send you photos if you like... Rob Ray RV4-List Digest Server wrote: * Online Versions of Today's List Digest Archive Today's complete RV4-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV4-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html& Chapter 06-12-25&Archive=RV4 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&C hapter 06-12-25&Archive=RV4 ====================== EMail Version of Today's List Digest Archive ====================== ---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Mon 12/25/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:52 PM - RV4 rear rudder pedal installation (Bradford Sharp) ________________________________ Message 1 _____________________________________ Time: 02:52:52 PM PST US From: Bradford Sharp Subject: RV4-List: RV4 rear rudder pedal installation MERRY CHRISTMAS, HAPPY NEW YEAR, I bought the rear rudder pedal kit for the RV4 from Vans. The instructions are not as clear as I had hoped. I really would appreciate any comments on the installation and some photos showing the completed task. And any other comments you'd care to mention. Send to my e-mail at: saberpilot@earthlink.net Cheers, Brad Sharp ________________________________ Message 3 _____________________________________ Time: 10:04:18 AM PST US From: Dwayne Cowles Subject: Re: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 Rob, I'd like to see your rudder pedal setup. Also, can you send pics of how you did the throttle. Dwayne Being all I can be flying (controling?) the predator! Rob Ray wrote: Brad, having bought the same setup when I built my -4, I stared at it like a pig looking at a wristwatch for a few days. I tossed the whole kit back in the box and went down to the Home Depot Aviation dept. I grabbed some cable clamps and attached them with some small tabs I made from angle aluminum directly to my rudder cables next to my rear passenger footwells. Works great and are removable. The Van's RR pedal kit requires cutting a long hole in the floorboard next to my leg in the front seat. I didn't like it. I like my setup mucho better. I can send you photos if you like... Rob Ray RV4-List Digest Server wrote: * ================================================= Online Versions of Today's List Digest Archive ================================================= Today's complete RV4-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV4-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 06-12-25&Archive=RV4 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 06-12-25&Archive=RV4 =============================================== EMail Version of Today's List Digest Archive =============================================== ---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Mon 12/25/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:52 PM - RV4 rear rudder pedal installation (Bradford Sharp) ________________________________ Message 1 _____________________________________ Time: 02:52:52 PM PST US From: Bradford Sharp Subject: RV4-List: RV4 rear rudder pedal installation MERRY CHRISTMAS, HAPPY NEW YEAR, I bought the rear rudder pedal kit for the RV4 from Vans. The instructions are not as clear as I had hoped. I really would appreciate any comments on the installation and some photos showing the completed task. And any other comments you'd care to mention. Send to my e-mail at: saberpilot@earthlink.net Cheers, Brad Sharp __________________________________________________ ________________________________ Message 4 _____________________________________ Time: 02:16:42 PM PST US From: Rob Ray Subject: Re: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 Will do, I'll send pics of my Rocket's setup too... RR Dwayne Cowles wrote: Rob, I'd like to see your rudder pedal setup. Also, can you send pics of how you did the throttle. Dwayne Being all I can be flying (controling?) the predator! Rob Ray wrote: Brad, having bought the same setup when I built my -4, I stared at it like a pig looking at a wristwatch for a few days. I tossed the whole kit back in the box and went down to the Home Depot Aviation dept. I grabbed some cable clamps and attached them with some small tabs I made from angle aluminum directly to my rudder cables next to my rear passenger footwells. Works great and are removable. The Van's RR pedal kit requires cutting a long hole in the floorboard next to my leg in the front seat. I didn't like it. I like my setup mucho better. I can send you photos if you like... Rob Ray RV4-List Digest Server wrote: * ================================================= Online Versions of Today's List Digest Archive ================================================= Today's complete RV4-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV4-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 06-12-25&Archive=RV4 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 06-12-25&Archive=RV4 =============================================== EMail Version of Today's List Digest Archive =============================================== ---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Mon 12/25/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:52 PM - RV4 rear rudder pedal installation (Bradford Sharp) ________________________________ Message 1 _____________________________________ Time: 02:52:52 PM PST US From: Bradford Sharp Subject: RV4-List: RV4 rear rudder __________________________________________________ ________________________________ Message 5 _____________________________________ Time: 02:19:25 PM PST US From: Rob Ray Subject: Re: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 No worries Jerry, will do! RR Jerry Grimmonpre wrote: Hi Rob ... Thanks for your word description of your rudder pedal fabrication. You sound very resourceful. I'm working on the same pedal install as well. Could you please copy me photo's when you send to Brad? Many thanks ... Jerry Grimmonpre' Huntley IL RV4 flying ----- Original Message ----- From: Rob Ray To: rv4-list@matronics.com Sent: Wednesday, December 27, 2006 9:01 AM Subject: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 Brad, having bought the same setup when I built my -4, I stared at it like a pig looking at a wristwatch for a few days. I tossed the whole kit back in the box and went down to the Home Depot Aviation dept. I grabbed some cable clamps and attached them with some small tabs I made from angle aluminum directly to my rudder cables next to my rear passenger footwells. Works great and are removable. The Van's RR pedal kit requires cutting a long hole in the floorboard next to my leg in the front seat. I didn't like it. I like my setup mucho better. I can send you photos if you like... Rob Ray RV4-List Digest Server wrote: * ======================== Online Versions of Today's List Digest Archive ======================== Today's complete RV4-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the RV4-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 06-12-25&Archive=RV4 Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 06-12-25&Archive=RV4 ====================== EMail Version of Today's List Digest Archive ====================== ---------------------------------------------------------- RV4-List Digest Archive --- Total Messages Posted Mon 12/25/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:52 PM - RV4 rear rudder pedal installation (Bradford Sharp) ________________________________ Message 1 _____________________________________ Time: 02:52:52 PM PST US From: Bradford Sharp Subject: RV4-List: RV4 rear rudder pedal installation MERRY CHRISTMAS, HAPPY NEW YEAR, I bought the rear rudder pedal kit for the RV4 from Vans. The instructions are not as clear as I had hoped. I really would appreciate any comments on the installation and some photos showing the completed task. And any other comments you'd care to mention. Send to my e-mail at: saberpilot@earthlink.net Cheers, Brad Sharp href="http://www.matronics.com/Navigator?RV4-List">http://www.matronics.com/Navigator?RV4-List href="http://forums.matronics.com">http://forums.matronics.com __________________________________________________ ________________________________ Message 6 _____________________________________ Time: 02:23:49 PM PST US From: DFCPAC@aol.com Subject: Re: RV4-List: Re: RV4-List Digest: 1 Msgs - 12/25/06 hi rob, this is dan with the rv-4 from ny. we are down in fl and was wondering if you'll be around. my friend has a 6 here and we could stop by. do you still have the rocket there? give me a call 631 880 2343 cell, let me know or email me dfcpac@aol.com danny ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv4-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV4-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv4-list Browse Digests http://www.matronics.com/digest/rv4-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.