Today's Message Index:
----------------------
1. 05:13 AM - Re: VS offset (S Sampson)
2. 07:17 AM - Re: VS offset (Brian Vickers)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Brian, did you talk to the factory yet? Thanks, Steve.
----- Original Message -----
From: Brian Vickers
To: rv4-list@matronics.com
Sent: Saturday, April 14, 2007 7:30 PM
Subject: RE: RV4-List: VS offset
Steve,
Don't fold up your tent so fast. I think from your responses there is
reasonably strong evidence to support installing with an offset. Jerry
I. and Dayton M. both are recent RV4 flyers that have noted the need to
hold right rudder in level cruise. Has Smokey replied on this? I am
going to call the factory Monday morning and see what they say. I don't
want a big trim tab on the rudder if a slight offset will put level
cruise flight at nearly neutral. I'll report back on the factory
response.
Brian Vickers, RV4 finishing
-------------------------------------------------------------------------
-----
From: owner-rv4-list-server@matronics.com
[mailto:owner-rv4-list-server@matronics.com] On Behalf Of S Sampson
Sent: Saturday, April 14, 2007 10:08 AM
To: rv4-list@matronics.com
Subject: Re: RV4-List: VS offset
Thanks everyone for the VS offset info. On balance I think I have been
talked out of the idea. I had thought that since the later RV are built
with the VS offset, it would make lots of sense, but though there was
some, there was not a lot of support. Cheers, Steve.
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System
on behalf of the London Business School community.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Sort of=85.
I talked with a guy that =93thought=94 it was a good idea since all the
subsequent RV models are rigged with =BC inch off-set. His response was
pretty casual. He was going to check into it and get back to me. I had
to
go out of town on business and so we have not connected up yet. I will
call
again on Monday morning. I will report back after I talk to him on
Monday.
Brian N. Vickers, MAI
RPA
Real Property Analysis, LLC
P.O. Box 11790
Bainbridge Island, WA 98110
Ph 206-780-9814
Fx 206-842-2496
_____
From: owner-rv4-list-server@matronics.com
[mailto:owner-rv4-list-server@matronics.com] On Behalf Of S Sampson
Sent: Saturday, April 21, 2007 5:13 AM
Subject: Re: RV4-List: VS offset
Brian, did you talk to the factory yet? Thanks, Steve.
----- Original Message -----
From: Brian Vickers <mailto:brianvic@msn.com>
Sent: Saturday, April 14, 2007 7:30 PM
Subject: RE: RV4-List: VS offset
Steve,
Don=92t fold up your tent so fast. I think from your responses there is
reasonably strong evidence to support installing with an offset. Jerry
I.
and Dayton M. both are recent RV4 flyers that have noted the need to
hold
right rudder in level cruise. Has Smokey replied on this? I am going
to
call the factory Monday morning and see what they say. I don=92t want a
big
trim tab on the rudder if a slight offset will put level cruise flight
at
nearly neutral. I=92ll report back on the factory response.
Brian Vickers, RV4 finishing
_____
From: owner-rv4-list-server@matronics.com
[mailto:owner-rv4-list-server@matronics.com] On Behalf Of S Sampson
Sent: Saturday, April 14, 2007 10:08 AM
Subject: Re: RV4-List: VS offset
Thanks everyone for the VS offset info. On balance I think I have been
talked out of the idea. I had thought that since the later RV are built
with
the VS offset, it would make lots of sense, but though there was some,
there
was not a lot of support. Cheers, Steve.
href="http://www.matronics.com/Navigator?RV4-List">http://www.matronics
com/
Navigator?RV4-List
href="http://forums.matronics.com">http://forums.matronics.com
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System
on behalf of the London Business School community.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|