Today's Message Index:
----------------------
1. 09:30 PM - Re: Roll Bar (H.Ivan Haecker)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Thanks to both of you for your responses. One other question: When
attaching the curved top piece to the two straight side bars, is a short
piece of tubing inserted before joining the pieces to strengthen what
would otherwise be a weaker butt joint?
Ivan Haecker -4 1439 hrs. So. Cen. Tx
----- Original Message -----
From: Tony & Marilyn Spicer
To: rv4-list@matronics.com
Sent: Saturday, February 23, 2008 10:34 AM
Subject: Re: RV4-List: Roll Bar
Ivan,
I made one from scratch using a U tube and two straight pieces of
tubing. Draw what you want full size and it will be easy to cut the U
tube in the right place. You'll have to Google the U tube, as I no
longer have the URL.
http://picasaweb.google.com/tonyboytoo/RV3BFuselage/photo#513684489498592
9762
Tony
----- Original Message -----
From: H.Ivan Haecker
To: rv4-list@matronics.com
Sent: Saturday, February 23, 2008 1:25 AM
Subject: RV4-List: Roll Bar
Does anyone have any info on how modify the original Van's roll bar
on an rv-4 to the style that has a rounded top. I have seen these on a
few -4's and HRII's over the years and wish to make one for an F-1
rocket with a tip over canopy. Perhaps someone knows of a supplier?
Thanks.
Ivan Haecker -4 1437 hrs. S. Cen. Tx
href="http://www.matronics.com/Navigator?RV4-List">http://www.matronics
.com/Navigator?RV4-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|