RV6-List Digest Archive
Thu 01/23/03 |
Total Messages Posted: 1 |
Today's Message Index:
----------------------
1. 10:39 PM - Aileron hinge (Dave von Linsowe)
Message 1
NEXT Skip to NEXT Message LIST Reply to LIST Regarding this Message SENDER Reply to SENDER Regarding this Message
Time: 10:39:23 PM PST US
From: "Dave von Linsowe" <davevon@tir.com>
<rv-list@matronics.com>
Subject: Aileron hinge
--> RV6-List message posted by: "Dave von Linsowe" <davevon@tir.com>
Help! I recently noticed that both inboard aileron hinges have a little
slop that has me concerned.
The source of the movement is the fit between the pivot bushing/bearing and
the hinge bracket on the wing. Looks to be .015"-.020" radially and .030"
axially. I have the means to manufacture an oversized bushing to eliminate
the play, but my question is. Can the bushing be removed without removing
hinge bracket from the wing? Or is there some other method of tightening up
the bushing?
Thanks,
Dave
RV-6
Other Matronics Email List Services
Post A New Message rv6-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV6-List.htm Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv6-list Browse RV6-List Digests http://www.matronics.com/digest/rv6-list Browse Other Lists http://www.matronics.com/browse Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contributions
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.