---------------------------------------------------------- RV6-List Digest Archive --- Total Messages Posted Sun 03/02/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:46 AM - Navaid AP. (Peter Dugdale) 2. 07:00 PM - Re: Navaid AP. (Russ Alnutt) ________________________________ Message 1 _____________________________________ Time: 09:46:34 AM PST US From: "Peter Dugdale" Subject: RV6-List: Navaid AP. --> RV6-List message posted by: "Peter Dugdale" Hello I am about to install a Navaid AP with plans on switching inputs between a King 155 VOR/LOC & a King 135A GPS. The folks at Navaid say no problem if you use a light weight 2 way 2 pole switch (I think). My questions are: 1) Any one had problems doing this? 2) Which switch has worked well (make/model/source)? 3) Any one ever wired in a DG AP bug as an input, if so, how? Thanks Peter dugdale@voyager.net ________________________________ Message 2 _____________________________________ Time: 07:00:15 PM PST US From: "Russ Alnutt" Subject: Re: RV6-List: Navaid AP. --> RV6-List message posted by: "Russ Alnutt" Peter, I also have an Navaid autopilot and am connected to a KX155 and also a Garmin 155XL. It can be done with a annunciator panel which I have, or with a switch. Contact a good radio shop and have them sell you a good switch and pre-wire it for you to make it easy. This way all you have to do is connect the wires with no problems. Russ ----- Original Message ----- From: "Peter Dugdale" Subject: RV6-List: Navaid AP. > --> RV6-List message posted by: "Peter Dugdale" > > Hello > > I am about to install a Navaid AP with plans on switching inputs between a King 155 VOR/LOC & a King 135A GPS. The folks at Navaid say no problem if you use a light weight 2 way 2 pole switch (I think). My questions are: > 1) Any one had problems doing this? > 2) Which switch has worked well (make/model/source)? > 3) Any one ever wired in a DG AP bug as an input, if so, how? > > Thanks > > Peter > dugdale@voyager.net > >