----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Thu 03/27/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:51 PM - Navaid A/P in RV6  (Peter Dugdale)
     2. 05:59 PM - Re: Navaid A/P in RV6  (Tim Lewis)
     3. 07:13 PM - Re: Navaid A/P in RV6  (Edwin L French)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:51:57 PM PST US
From: "Peter Dugdale" <dugdale@voyager.net>
Subject: RV6-List: Navaid A/P in RV6

--> RV6-List message posted by: "Peter Dugdale" <dugdale@voyager.net>

Hello

    For those of you with a Naviad A/P in an RV6 with the servo under the seat,
the servo push-pull tube is at an angle to the aileron tube so a component of
the force will push/pull on the elevator.  Has this been an issue for anyone?
I'm about to mount mine in this location.

    Thanks

    Peter
    dugdale@voyager.net






________________________________  Message 2  _____________________________________


Time: 05:59:53 PM PST US
From: "Tim Lewis" <timrv6a@earthlink.net>
Subject: Re: RV6-List: Navaid A/P in RV6

--> RV6-List message posted by: "Tim Lewis" <timrv6a@earthlink.net>

It's been no problem in 500+ hours.  I mounted the servo in a tray, and 
attached the tray to some angle pieces riveted to the sides of the ribs.  
This allowed me to move the servo as far forward as possible, which 
minimizes the pitch coupling angle.

Tim

From:                   "Peter Dugdale" <dugdale@voyager.net>
Subject:                RV6-List: Navaid A/P in RV6
Date sent:              Thu, 27 Mar 2003 19:55:53 -0500
Send reply to:          rv6-list@matronics.com

> --> RV6-List message posted by: "Peter Dugdale" <dugdale@voyager.net>
> 
> Hello
> 
>     For those of you with a Naviad A/P in an RV6 with the servo under the seat,
the servo push-pull tube is at an angle to the aileron tube so a component
of the force will push/pull on the elevator.  Has this been an issue for anyone?
I'm about to mount mine in this location.
> 
>     Thanks
> 
>     Peter
>     dugdale@voyager.net
> 
> 
> 
> 
> 
> 


******
Tim Lewis -- HEF (Manassas, VA)
RV-6A N47TD - First Flight 18 Dec 99
http://www.geocities.com/timrv6a
******






________________________________  Message 3  _____________________________________


Time: 07:13:18 PM PST US
From: "Edwin L French" <ted_french@telus.net>
Subject: RE: RV6-List: Navaid A/P in RV6

--> RV6-List message posted by: "Edwin L French" <ted_french@telus.net>

Take a look at this installation. Ran the push pull to the pilots 
side. Easy to do and works well.

http://www3.telus.net/elfrench/rv6%20no4.html

 Ted French
 RV-6A x 3 All flying

-----Original Message-----
From: owner-rv6-list-server@matronics.com
[mailto:owner-rv6-list-server@matronics.com] On Behalf Of Peter Dugdale
Subject: RV6-List: Navaid A/P in RV6

--> RV6-List message posted by: "Peter Dugdale" <dugdale@voyager.net>

Hello

    For those of you with a Naviad A/P in an RV6 with the servo under
the seat, the servo push-pull tube is at an angle to the aileron tube so
a component of the force will push/pull on the elevator.  Has this been
an issue for anyone?  I'm about to mount mine in this location.

    Thanks

    Peter
    dugdale@voyager.net