----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Mon 08/11/03: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:10 PM - Grounding block RV6A  (Ralph E. Capen)
     2. 12:54 PM - Re: Grounding block RV6A  (Stein Bruch)
     3. 04:13 PM - Garmin 196 Panel Mount  (Stein Bruch)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:10:48 PM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: Grounding block RV6A

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Folks,

I have the B&C grounding block - but can't figure out where to put it.

Obviously, it can't go where the brake reservoir sits, but are there other sites
that shouldn't be used?

Where did you that are flying put yours?

Ralph Capen
Got the power side of the wiring started - need to ground everything






________________________________  Message 2  _____________________________________


Time: 12:54:44 PM PST US
From: "Stein Bruch" <stein@steinair.com>
Subject: RE: RV6-List: Grounding block RV6A

--> RV6-List message posted by: "Stein Bruch" <stein@steinair.com>

Mines on the other side of the firewall (pilots side) toward the upper left
hand corner.

Cheers,
Stein Bruch
RV6, N664SB

-----Original Message-----
From: owner-rv6-list-server@matronics.com
[mailto:owner-rv6-list-server@matronics.com]On Behalf Of Ralph E. Capen
Subject: RV6-List: Grounding block RV6A


--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Folks,

I have the B&C grounding block - but can't figure out where to put it.

Obviously, it can't go where the brake reservoir sits, but are there other
sites that shouldn't be used?

Where did you that are flying put yours?

Ralph Capen
Got the power side of the wiring started - need to ground everything






________________________________  Message 3  _____________________________________


Time: 04:13:59 PM PST US
From: "Stein Bruch" <stein@steinair.com>
   "Rv6-List" <rv6-list@matronics.com>
Subject: RV6-List: Garmin 196 Panel Mount

--> RV6-List message posted by: "Stein Bruch" <stein@steinair.com>

Hi All,

I've finally posted a few pictures of my Garmin 196 panel mount that I've
made.

They can be seen at: http://www.steinair.com and click on "RV6 - N64YU".

Cheers,
Stein Bruch

Do Not Archive