----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Thu 09/18/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:01 PM - Re: Rivet gunner.  (Slgmjg1@cs.com)
     2. 05:11 PM - Re: VHF transmit problem  (Slgmjg1@cs.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:01:13 PM PST US
From: Slgmjg1@cs.com
Subject: Re: RV6-List: Rivet gunner.

--> RV6-List message posted by: Slgmjg1@cs.com

Dean,
    If you can't find an experienced rivet gunner you could back rivet them 
with the help of someone with little experience. I used this method, which 
worked perfectly. That way you can crawl inside with your trusty rivet gun and

have someone outside with a bucking bar. I made a 2" dia. bar that weighs about

two pounds. polished the face of it and back riveted every thing I could get 
the gun on. Just a thought.

Mark, Finishing Kit.+






________________________________  Message 2  _____________________________________


Time: 05:11:21 PM PST US
From: Slgmjg1@cs.com
Subject: Re: RV6-List: VHF transmit problem

--> RV6-List message posted by: Slgmjg1@cs.com

Steve,
  A friend at the airport had what sounds like the same problem on an RV6. 
After some wire tracing we found the ground wire for the radio had a broken 
screw on the grounding terminal. You may want to look were your radio is grounded

just to make sure. 

Mark, Finishing kit +