---------------------------------------------------------- RV6-List Digest Archive --- Total Messages Posted Mon 02/09/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:01 AM - WANTED: Brake Pedals () 2. 05:15 PM - Baffle Question (Mike Comeaux) ________________________________ Message 1 _____________________________________ Time: 11:01:41 AM PST US From: Subject: RV6-List: WANTED: Brake Pedals --> RV6-List message posted by: This pertains mainly to earlier -6(a) builders: Our local EAA Chapter is in need of ONE SET of BRAKE-PEDALS from the older style *floor*-mounted Rudder Bars for our Chapter Project. So, if you have a spare set of these left over (from converting to the newer overhead style rudder bars, etc.), we sure could use these older brake pedals. Please email me directly if you have these specific brake pedals left over. Thanks, and DO NOT ARCHIVE Konrad klwerner@comcast.net ________________________________ Message 2 _____________________________________ Time: 05:15:41 PM PST US From: "Mike Comeaux" Subject: RV6-List: Baffle Question --> RV6-List message posted by: "Mike Comeaux" Installing baffles & instructions say 3/8-1/2 is that enough clearance ? clearance from baffle to top cowl. Any good pics or web site showing detail to inlet floors? Regards Mike Comeaux mcomeaux@bendnet.com Do not archive