Today's Message Index:
----------------------
1. 05:39 AM - Re: Air inlet mods (John Mcmahon)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Air inlet mods |
--> RV6-List message posted by: "John Mcmahon" <rv6@earthlink.net>
Peter
Does this help any!!.have 0360 A1A carb
John McMahon (Painting)
----- Original Message -----
From: "Peter Dugdale" <dugdale@voyager.net>
Subject: RV6-List: Air inlet mods
> --> RV6-List message posted by: "Peter Dugdale" <dugdale@voyager.net>
>
> Hello
>
> I have a -6 with the 200HP I0360A1A flying with a wooden prop (w/ext)
and a throttle body air inlet modeled off the -8 demonstrator (Straight air
flow into the throttle body which I did a wet layup). I plan on a C/S prop
over the winter which means I need to shorten the T.B. inlet due to not
needing the prop extension. I was looking at Oshkosh at some of the "slot"
style inlet just below the spinner. Looks to be less drag.
> Please reply if you have done this, or know someone who has? Looks
like a wet layup?
>
> Thanks
>
> Peter
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|