----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Mon 10/25/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:39 AM - Re: Air inlet mods  (John Mcmahon)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:39:30 AM PST US
From: "John Mcmahon" <rv6@earthlink.net>
Subject: Re: RV6-List: Air inlet mods

--> RV6-List message posted by: "John Mcmahon" <rv6@earthlink.net>

Peter
Does this help any!!.have 0360 A1A carb

 John McMahon  (Painting)


----- Original Message ----- 
From: "Peter Dugdale" <dugdale@voyager.net>
Subject: RV6-List: Air inlet mods


> --> RV6-List message posted by: "Peter Dugdale" <dugdale@voyager.net>
>
> Hello
>
>     I have a -6 with the 200HP I0360A1A flying with a wooden prop (w/ext)
and a throttle body air inlet modeled off the -8 demonstrator (Straight air
flow into the throttle body which I did a wet layup).  I plan on a C/S prop
over the winter which means I need to shorten the T.B. inlet due to not
needing the prop extension.  I was looking at Oshkosh at some of the "slot"
style inlet just below the spinner.  Looks to be less drag.
>     Please reply if you have done this, or know someone who has?  Looks
like a wet layup?
>
>     Thanks
>
>     Peter
>
>