----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Sun 09/18/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 07:10 AM - RV6A mainwheel base dimension  (Ralph E. Capen)
     2. 01:52 PM - Re: RV6A mainwheel base dimension  (Dick)
 
 
 
________________________________  Message 1  _____________________________________


Time: 07:10:38 AM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: RV6A mainwheel base dimension
        INNOCENT GLOBAL 0.0000 1.0000 -4.4912

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Folks,

I've checked the archives and have some partial answers....

What I am looking for is the center-of-tread to center-of tread distance between
the main landing gear for an O360 CS equipped RV6A that is flying.

Thanks,
Ralph Capen






________________________________  Message 2  _____________________________________


Time: 01:52:09 PM PST US
From: "Dick" <dick@rclabs.com>
Subject: Re: RV6-List: RV6A mainwheel base dimension

--> RV6-List message posted by: "Dick" <dick@rclabs.com>

Mine is 82 1/2" with about half full fuel tanks.

                                                                    Dick
Wildman


N164DF
----- Original Message ----- 
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: RV6A mainwheel base dimension


> --> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>
>
> Folks,
>
> I've checked the archives and have some partial answers....
>
> What I am looking for is the center-of-tread to center-of tread distance
between the main landing gear for an O360 CS equipped RV6A that is flying.
>
> Thanks,
> Ralph Capen
>
>