Today's Message Index:
----------------------
1. 11:56 AM - Fuel system design (Ralph E. Capen)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fuel system design |
INNOCENT GLOBAL 0.0000 1.0000 -4.4912
--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>
Folks,
I am in the beginning stages of figuring out what I need to install for my fuel
system.
The engine is an Aerosport Power O360 with AirFlow Performance injection. I also
have a VM1000 for system monitoring.
I already have my fuel selector valve (Andair) that supports the purge system return
lines. The engine/injection system came with a mechanical and electric
boost pumps.
What I would like to find out is what have others already done as far as what goes
where from a flow perspective?
I know that I need to put my fuel pressure/flow transducers in the mix as well
as filter(s). Do injection systems have a different gascolator due to the higher
pressures? Do I even need a gascolator with an injection system? (probably!)
Some of these things may be in the instructions for the kit as well as the engine/injection
system - but I have also determined that they are not the definitive/only
way and do not always cover the design that you are implementing.
Thanks in advance,
Ralph Capen
RV6AQB N822AR N06
Trons flowing pretty good - gotta get to work on the big fan up front........
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|