----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Tue 11/15/05: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:56 AM - Fuel system design  (Ralph E. Capen)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:56:48 AM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: Fuel system design
        INNOCENT GLOBAL 0.0000 1.0000 -4.4912

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Folks,

I am in the beginning stages of figuring out what I need to install for my fuel
system.

The engine is an Aerosport Power O360 with AirFlow Performance injection.  I also
have a VM1000 for system monitoring.

I already have my fuel selector valve (Andair) that supports the purge system return
lines.  The engine/injection system came with a mechanical and electric
boost pumps.

What I would like to find out is what have others already done as far as what goes
where from a flow perspective?

I know that I need to put my fuel pressure/flow transducers in the mix as well
as filter(s).  Do injection systems have a different gascolator due to the higher
pressures?  Do I even need a gascolator with an injection system? (probably!)

Some of these things may be in the instructions for the kit as well as the engine/injection
system - but I have also determined that they are not the definitive/only
way and do not always cover the design that you are implementing.

Thanks in advance,
Ralph Capen
RV6AQB N822AR N06
Trons flowing pretty good - gotta get to work on the big fan up front........