----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Wed 12/28/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:38 AM - Builder Websites  (Jerry2DT@aol.com)
     2. 07:27 PM - Re: Re: New Tail  (Grahame)
     3. 07:42 PM - Re: Re: New Tail  (Docstevew1@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:38:49 AM PST US
From: Jerry2DT@aol.com
Subject: RV6-List: Builder Websites


Ed,

Here are a couple of my personal favorites, both tip ups and -7's . 


_http://www.rvproject.com/_ (http://www.rvproject.com/)  Dan  Checkoway

_http://rv7-a.com/_ (http://rv7-a.com/)   Walter  Tondu


However, most of everything they do is same for your -6. If you want  to make 
your project easier, cough up for a set of RV7 plans and finish your 6  just 
like that. Plans make much more sense, with lots of instructs right on the  
plans. The only real diff between 6 and 7 is the 7's wings are each a foot  
longer. 
You'll also find mucho RV resources on the non-specific RV lists at 

_http://www.matronics.com/listbrowse/rv-list/date.html_ 
(http://www.matronics.com/listbrowse/rv-list/date.html) 
or
_http://www.vansairforce.net/_ (http://www.vansairforce.net/) 

Hope this helps...

Jerry Cochran
Wilsonville, Oregon


In a message dated 12/28/2005 12:09:55 A.M. Pacific Standard Time,  
rv6-list-digest@matronics.com writes:

From:  "Ed Hollestelle" <ed@solairecanada.com>
Subject: RE: RV6-List: Re:  RV6-List Digest: 8 Msgs - 12/16/05

I am new to this group and just  recently took over on an older RV-6 project
(s/n 24745)

Starting  with Van's website I did some searching and found Sam Buchanan's
RV6  website. His step by step pictures and commentary are very helpful  and
clarifies what you sometimes can't picture looking at the directions in  the
manual.

His RV-6 has a slider and I ordered a tip-up. Does  anybody know where I
could find more info/pictures without going through  all the RV6 listings?

Ed Hollestelle-Thamesford,  Ontario


________________________________  Message 2  _____________________________________


Time: 07:27:27 PM PST US
From: Grahame <rv6@shaw.ca>
Subject: Re: RV6-List: Re: New Tail

There's one on Ebay!
  ----- Original Message -----
  From: Docstevew1@aol.com
  To: rv6-list@matronics.com
  Sent: Sunday, December 25, 2005 11:58 AM
  Subject: Re: RV6-List: Re: New Tail


  Del,
  If your RV 6 empennage is still available, I'll take it. Email me off line at
docstevew1@aol.com, or call me at 951-600-9329.
  Thanks,
  Steve Weidler
________________________________  Message 3  _____________________________________


Time: 07:42:19 PM PST US
From: Docstevew1@aol.com
Subject: Re: RV6-List: Re: New Tail

Does not look like the counterbalanced rudder in the pictures. 
Thanks anyway,
Steve