Today's Message Index:
----------------------
1. 07:38 AM - Remove fro list (Lee Adcox)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> RV6-List message posted by: "Lee Adcox" <ladcox@leasesouth.com>
-----Original Message-----
From: owner-rv6-list-server@matronics.com
[mailto:owner-rv6-list-server@matronics.com] On Behalf Of RV6-List Digest
Server
Sent: Wednesday, April 19, 2006 1:58 AM
Subject: RV6-List Digest: 1 Msgs - 04/18/06
*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete RV6-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the RV6-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/rv6-list/Digest.RV6-List.2006-04-18.html
Text Version:
http://www.matronics.com/digest/rv6-list/Digest.RV6-List.2006-04-18.txt
================================================
EMail Version of Today's List Digest Archive
================================================
RV6-List Digest Archive
---
Total Messages Posted Tue 04/18/06: 1
Today's Message Index:
----------------------
1. 01:09 PM - Throttle, Prop, and Mixture cable slack (Ralph E. Capen)
________________________________ Message 1
_____________________________________
Time: 01:09:05 PM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: Throttle, Prop, and Mixture cable slack
--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>
Fellow listers,
I'm working on my firewall foreward and since I had already made some
decisions
before the firewall foreward kit was available, I can't use the stock
locations
for my throttle and mixture cables. The prop cable went in to the stock
location
nicely with the one hole eyeball fitting.
There seems to be just a little slack in that cable - just enough to allow
flexibility
to keep it out of the way.
How much should I have? Upon measuring the cables that I got for the
throttle
and mixture after putting them in where I could, I have 6" too much throttle
cable
and 7" too much mixture cable. These are straight shot from the
panel/console
to the eyeball passthrough the firewall. on the firewall side, I have
sufficient
'Lycoming wet dog shake room'. I'm thinking on the aft side of the
firewall, I don't need much wiggle room other than to avoid stuff that could
get
in the way and wear the cable.
Your thoughts please,
Ralph
RV6AQB N822AR @ N06 - fun firewall foreward!
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|