----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Tue 05/02/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:39 AM - Firesleeving  (Ralph E. Capen)
     2. 07:49 PM - Re: RV-List: Firesleeving  (Ross Scroggs)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:39:42 AM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: Firesleeving

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Folks,

>From what I've seen, most folks are not firesleeving their oil cooler feed/return/pressure
lines nor their fuel pressure line which I'm OK with.

Fuel feed/return lines I think need to be firesleeved.....

I'm having a problem determining what size firesleeve to use.  The ACS website
has a table for their firesleeve parts which does not list the 303 hose that we're
supposed to use.

I'm getting ready to buy the stuff to build my fuel hoses - including the firesleeving.
I'll be building an assembly that includes a pair of hoses and a fuel
flow meter - I'm guessing that I'll need a larger chunk of firesleeve to go
over the flow meter.

Can anyone tell me what the correct size of Firesleeving is for a 303-4, 303-6,
and Flowscan 201 fuel flow meter?

Thanks,
Ralph


________________________________  Message 2  _____________________________________


Time: 07:49:38 PM PST US
From: "Ross Scroggs" <rv4ross@charter.net>
Subject: RV6-List: Re: RV-List: Firesleeving

--> RV6-List message posted by: "Ross Scroggs" <rv4ross@charter.net>

Ralph,
   According to the ACS catalog, page 122, the 303-4 hose uses AE102-9, the 
303-6 uses
AE102-12.  Both firesleeve's use the 900591B-2C clamp.
  Don't think I've ever seen firesleeve on a flow meter/transducer.

Ross Scroggs
RV-4 #3911
Locust Grove, GA.

----- Original Message ----- 
From: "Ralph E. Capen" <recapen@earthlink.net>
<rv10-list@matronics.com>
Sent: Tuesday, May 02, 2006 9:38 AM
Subject: RV-List: Firesleeving


> --> RV-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>
>
> Folks,
>
>>From what I've seen, most folks are not firesleeving their oil cooler 
>>feed/return/pressure lines nor their fuel pressure line which I'm OK with.
>
> Fuel feed/return lines I think need to be firesleeved.....
>
> I'm having a problem determining what size firesleeve to use.  The ACS 
> website has a table for their firesleeve parts which does not list the 303 
> hose that we're supposed to use.
>
> I'm getting ready to buy the stuff to build my fuel hoses - including the 
> firesleeving.  I'll be building an assembly that includes a pair of hoses 
> and a fuel flow meter - I'm guessing that I'll need a larger chunk of 
> firesleeve to go over the flow meter.
>
> Can anyone tell me what the correct size of Firesleeving is for a 303-4, 
> 303-6, and Flowscan 201 fuel flow meter?
>
> Thanks,
> Ralph
>
>
>