----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Tue 05/09/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:53 AM - Firewall Oil cooler location  (Ralph E. Capen)
     2. 05:04 AM - Crankcase breather vent fitting  (Ralph E. Capen)
     3. 09:45 AM - SS prop governor line  (Ralph E. Capen)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:53:07 AM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: Firewall Oil cooler location

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Fellow builders,

I would like to use Vans stock location for my firewall mounted oil cooler - in
order that I can use their prefabbed lines.  I'm gonna need to build a couple
regardless but they will be -6 instead of the oil cooler -8 lines.

I have Vans firewall foreward documentation but don't recall seeing a location
called out.  I'm using an Aerosport built O360 so the stock engine locations are
available.

Anyone out there used Vans oil cooler hoses with their called out location?  Please
give me a leader on their documentation.

Thanks,
Ralph Capen
RV6A QB N822AR @ N06 working on firewall foreward


________________________________  Message 2  _____________________________________


Time: 05:04:46 AM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: Crankcase breather vent fitting

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Fellow builders,

I bought the FF705 and CV9816 breather parts from Vans for venting my Aerosport
built O360.

Come to find out that the vent fitting on my engine is 5/8" instead of the 3/4"
one that the CV9816 is called for.
The good news is that the vent fitting on my engine is a 45 degree fitting already
pointed aft - so I don't want to change it out.

Anyone out there using the 45 degree 5/8" fitting?  How did you build up the hoses?
Does it work OK?

Thanks,
Ralph
RV6AQB N822AR @ N06 - working on firewall foreward


________________________________  Message 3  _____________________________________


Time: 09:45:23 AM PST US
From: "Ralph E. Capen" <recapen@earthlink.net>
Subject: RV6-List: SS prop governor line

--> RV6-List message posted by: "Ralph E. Capen" <recapen@earthlink.net>

Anyone out there have photos of a stainless steel prop governor line installed
on their O360?

Getting ready to do the same thing and wanna see how it should look when I'm done.

Thanks,
Ralph