Today's Message Index:
----------------------
1. 09:00 PM - Re: Firewall Oil cooler location (Larry Rush)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Firewall Oil cooler location |
Be sure to use 1/2" oil lines not 3/8". You need all the flow you can get for
cooling.
I mounted mine on the back of the left baffle so can't help on FW mount. I would
just pick a place on the right side that will be clear of other stuff. My
engine is a Aero Sport Power O-360 and I love it. Flying since July 2001. If I
did a FW mount I would use a 9 tube cooler too. Again, hot oil temps are common
on tri gears.
Larry
"Ralph E. Capen" <recapen@earthlink.net> wrote:
--> RV6-List message posted by: "Ralph E. Capen"
Fellow builders,
I would like to use Vans stock location for my firewall mounted oil cooler - in
order that I can use their prefabbed lines. I'm gonna need to build a couple
regardless but they will be -6 instead of the oil cooler -8 lines.
I have Vans firewall foreward documentation but don't recall seeing a location
called out. I'm using an Aerosport built O360 so the stock engine locations are
available.
Anyone out there used Vans oil cooler hoses with their called out location? Please
give me a leader on their documentation.
Thanks,
Ralph Capen
RV6A QB N822AR @ N06 working on firewall foreward
"LIMA TANGO SENDS"
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|