----------------------------------------------------------
                           RV6-List Digest Archive
                                      ---
                     Total Messages Posted Wed 08/15/07: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:34 AM - Re: F-641 / pushrod interference  (Bert Murillo)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:34:01 AM PST US
From: "Bert Murillo" <bertrv6@gmail.com>
Subject: Re: RV6-List: F-641 / pushrod interference


On 8/13/07, kbob@cox.net <kbob@cox.net> wrote:
>
> Erik,
> I had the same problem on my 6A. The control rods are not adjustable to get this
issue resolved.  Grab your half round file or dremel and make sure you have
~1/8" clearance underneath. You don't want this part to hang up at any time.
>
> Kelly Patterson
> RV-6A N716K Chandler
> 170 hours (& only 1 emergency landing!)
>
> ---- mister murphy <mister_murphy@yahoo.com> wrote:
> >
> > Hi everyone,
> >
> > Has anyone else had any problems with the pushrod
> > bumping the bottom of the F-641 with the control in
> > the full forward position? I have checked and double
> > checked both the pushrod installation and the mounts
> > for the control column and am unable to get it any
> > lower. I spoke with vans a while back about it and
> > they said to just cut a notch in the center of the
> > F-641 at its lowest spot so it doesnt hit the pushrod.
> > Also this notch will be between the side panels for
> > the electric flap actuator.
> >
> > Any ideas folks? I am at a loss....
> >
> > Erik
> > RV-6A Fuse
> >
> > Do not archive
> >
> >
> >
> >
> > Pinpoint customers Eriki:  If I remember I used the heavy snips, and remove
      some of the material, it was very little, just enough for the push rod, to
      move freely..  that is the center,  of cockpit center well no?
       Just be sure the rod does not trouch anywhere when moving to full
       deflection..

       bert  rv6a

      do not archive


> >
> >
> >
>
>


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               rv6-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/RV6-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/rv6-list
Browse Digests                   http://www.matronics.com/digest/rv6-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.