---------------------------------------------------------- RV6-List Digest Archive --- Total Messages Posted Wed 04/30/08: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:26 AM - Looking for Frank Justice manual section (wild1ranch@wild1ranch.com) 2. 09:07 AM - Re: Looking for Frank Justice manual section (Schroeder, Bob (Parts Clerk)) 3. 09:14 AM - Re: Looking for Frank Justice manual section (S Hamer) 4. 09:35 AM - (Steve Wieland) 5. 09:47 AM - Re: (BPA) 6. 10:10 AM - Re: (MnwPeeps@AOL.COM) 7. 11:10 AM - Conical engine mount (George Frost) 8. 09:34 PM - Re: (Henry) ________________________________ Message 1 _____________________________________ Time: 07:26:17 AM PST US Subject: RV6-List: Looking for Frank Justice manual section From: wild1ranch@wild1ranch.com Im looking for the section "remove from the jig" all the links I find seem to be broken. thanks for your help Bill Slow build RV6 ________________________________ Message 2 _____________________________________ Time: 09:07:07 AM PST US Subject: RE: RV6-List: Looking for Frank Justice manual section From: "Schroeder, Bob (Parts Clerk)" The printed text? -----Original Message----- From: owner-rv6-list-server@matronics.com [mailto:owner-rv6-list-server@matronics.com] On Behalf Of wild1ranch@wild1ranch.com Sent: Wednesday, April 30, 2008 8:23 AM Subject: RV6-List: Looking for Frank Justice manual section Im looking for the section "remove from the jig" all the links I find seem to be broken. thanks for your help Bill Slow build RV6 ________________________________ Message 3 _____________________________________ Time: 09:14:31 AM PST US From: "S Hamer" Subject: Re: RV6-List: Looking for Frank Justice manual section Bill, It's a very short section. Here's what it says: Removing the Fuselage from the Jig Decide how you are going to support the fuselage once you take it out of the jig. One really handy way is to make bolt-on front legs. Make a couple of wood strips about 7 1/2" wide and 24" long, then drill them to bolt where the main spar goes but extending out about 8" outside the skin. Nail 29" legs to these and you will have your main longeron 45" off the floor when you turn the fuselage over. Make a skinny sawhorse for the rear. If you made the imitation wing for mounting -6A gear legs you can cut them down for this. These legs make it extremely unlikely that you knock the fuselage over accidentally. Remove all the clamps and bolts holding the fuselage in, lift it off, and set it upright. End The next section is "Assorted Small Steps". I hope this helps. Steve Hamer RV-6 flying Apple Valley, Ca ----- Original Message ----- From: Sent: Wednesday, April 30, 2008 7:23 AM Subject: RV6-List: Looking for Frank Justice manual section > > Im looking for the section "remove from the jig" all the links I find > seem to be broken. > > thanks for your help > > Bill > Slow build RV6 > > > ________________________________ Message 4 _____________________________________ Time: 09:35:36 AM PST US From: "Steve Wieland" Subject: RV6-List: Hi Folks.....I'm interested in an RV6-A in Seattle WA..... is there anyone that can help me with a look at it before purchase.....I'm a non-mechanic ex-airline/ ex-fighter guy in NC...thanks!! Steve ________________________________ Message 5 _____________________________________ Time: 09:47:38 AM PST US Subject: RE: RV6-List: From: "BPA" Steve, Not sure if they have the time, but contact Butch or Brian at Showplanes. They are in Medford Oregon. They might be able to help or direct you to someone who can. Allen Barrett BPE, Inc. -----Original Message----- From: owner-rv6-list-server@matronics.com [mailto:owner-rv6-list-server@matronics.com] On Behalf Of Steve Wieland Sent: Wednesday, April 30, 2008 10:30 AM Subject: RV6-List: Hi Folks.....I'm interested in an RV6-A in Seattle WA..... is there anyone that can help me with a look at it before purchase.....I'm a non-mechanic ex-airline/ ex-fighter guy in NC...thanks!! Steve ________________________________ Message 6 _____________________________________ Time: 10:10:51 AM PST US From: MnwPeeps@AOL.COM Subject: Re: RV6-List: Steve - If that one doesn't look so good, or doesn't work out, you might give me a yell. I have a 6-A that is casually for sale - Boston area. New Engine, prop. I'm also ex-mil and ret. airline. _flmr123@aol.com_ (mailto:flmr123@aol.com) **************Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos. (http://autos.aol.com/used?NCID=aolcmp00300000002851) ________________________________ Message 7 _____________________________________ Time: 11:10:54 AM PST US From: George Frost Subject: RV6-List: Conical engine mount I might as well try this again. I have a Lycoming conical engine mount and gear legs for an RV_6. Anyone using an early 0-320? ________________________________ Message 8 _____________________________________ Time: 09:34:58 PM PST US From: Henry Subject: Re: RV6-List: Hello Steve: I'm based in Seattle. If you tell me where the plane is, exactly what you want me to look at (a checklist would be perfect) and let the seller know my email address, I can go look at it for you, fly it if need be, and send digital pix if you don't already have them from the seller. Henry Hochberg RV6 KAWO N72224 Mooney 252 KPAE N252MK Steve Wieland wrote: > Hi Folks.....I'm interested in an RV6-A in Seattle WA..... is there > anyone that can help me with a look at it before purchase.....I'm a > non-mechanic ex-airline/ ex-fighter guy in NC...thanks!! > Steve > * > > > * ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv6-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV6-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv6-list Browse Digests http://www.matronics.com/digest/rv6-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.