RV6-List Digest Archive

Tue 10/21/08


Total Messages Posted: 1



Today's Message Index:
----------------------
 
     1. 04:32 AM - Re: Heat and Cowling RV6 (John Paul Noyes)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:32:13 AM PST US
    From: "John Paul Noyes" <info@bigskymartialarts.com>
    Subject: Heat and Cowling RV6
    Thank you for the suggestion I called Vans this morning and will get the heat shield on, maybe this should be some thing other RV owners should consider before they have a fiberglass issue as I now do. John Paul _____ From: owner-rv6-list-server@matronics.com [mailto:owner-rv6-list-server@matronics.com] On Behalf Of Jeff Orear Sent: Monday, October 20, 2008 8:34 AM Subject: Re: RV6-List: Heat and Cowling RV6 John: Van's sells a self-adhesive foil heat shield material that you can stick on the inside of the cowl in the area where heat is a factor. Just make sure you clean the area real well so it will adhere. K2R spot remover does real well to suck oil out of the pre-preg type epoxy cowls that Vans now supplies with their kits if that is the type you have. If not, just use naphtha (coleman's lantern fuel) or lacquer thinner. Regards, Jeff Orear RV6A N782P Peshtigo, WI On Oct 18, 2008, at 4:39 PM, John Paul Noyes wrote: RV Group, I have an RV6, changed the oil today and noticed that the bottom cowling has a bubble about 6" in diameter next to the exhaust where it makes the bend from the manifold (closest point to the cowling), obviously the exhaust is to hot for the cowling at this point, from the out side of the cowling you can also just see the bubble. This is now a weaker area of the cowling; I did not build the airplane and am wondering what I should do about the heat first and then the cowling. The cowling may have been like this since my last oil change and perhaps will be something I deal with down the road. I can not imagine this causing a major failure but will probably just become unsightly to a point where it needs to be fixed. Any feed back is wanted and welcome. Thank you, John Paul Montana <http://www.matronics.com/Navigator?RV6-List> http://www.matronics.com/Navigator?RV6-List <http://forums.matronics.com> http://forums.matronics.com <http://www.matronics.com/contribution> http://www.matronics.com/contribution http://forums.matronics.com style="color: blue; text-decoration: underline; ">http://www.matronics.com/contribution




    Other Matronics Email List Services

  • Post A New Message
  •   rv6-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/RV6-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/rv6-list
  • Browse RV6-List Digests
  •   http://www.matronics.com/digest/rv6-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --