---------------------------------------------------------- RV6-List Digest Archive --- Total Messages Posted Thu 09/17/09: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:16 AM - Re: Leaking tank (Hedrick) 2. 08:54 AM - Re: Leaking tank (MnwPeeps@aol.com) 3. 10:59 AM - Re: Leaking tank (Hedrick) 4. 11:43 AM - Re: Leaking tank (MnwPeeps@aol.com) 5. 02:43 PM - Leaking tank (Robert Murillo) ________________________________ Message 1 _____________________________________ Time: 05:16:36 AM PST US From: "Hedrick" Subject: RE: RV6-List: Leaking tank Yes, Tom. I would like the name of this stuff as I have that same leading edge leak. Keith Hedrick RV6 3LF _____ From: owner-rv6-list-server@matronics.com [mailto:owner-rv6-list-server@matronics.com] On Behalf Of MnwPeeps@aol.com Sent: Wednesday, September 16, 2009 9:57 PM Subject: Re: RV6-List: Leaking tank My tank was leaking just through the leading edge rivets. My mech put on, very tightly, a sort-of plastic tape substance (with no air bubbles) - three years ago and I've had no leaks since. Will get the name of the stuff if you want it, but it looks like very basic stuff. If your actual tank is leaking elsewhere then I suppose (sort of obvious) this won't work for you without taking all the bolts out, anyway. Tom In a message dated 9/16/2009 5:04:42 P.M. Eastern Daylight Time, robertrv09@yahoo.com writes: Hi: My right tank, on my rv6a is leaking, I tried puting Pro seal on the out side , that does not work. Need the best way of doing this, and of course, if possible the easiest... Is a pain removing all thos bolts.. Thanks for sugestions, Bert ______________________________________ =================================== ="http://www.matronics.com/Navigator?RV6-List">http://www.matronics.com/Navi gator?RV6-List =================================== ms.matronics.com/">http://forums.matronics.com =================================== tp://www.matronics.com/contribution">http://www.matronics.com/contribution =================================== 17:49:00 ________________________________ Message 2 _____________________________________ Time: 08:54:29 AM PST US From: MnwPeeps@aol.com Subject: Re: RV6-List: Leaking tank Keith - I just talked to my mech, and - to my surprise - he couldn't remember the name of the product! But he will, and I've asked him to call me right away when he does, and we'll get it to you. Tom In a message dated 9/17/2009 8:17:24 A.M. Eastern Daylight Time, khedrick@frontiernet.net writes: Yes, Tom. I would like the name of this stuff as I have that same leading edge leak. ________________________________ Message 3 _____________________________________ Time: 10:59:37 AM PST US From: "Hedrick" Subject: RE: RV6-List: Leaking tank No prob. thanks for asking. Maybe he will remember. kt _____ From: owner-rv6-list-server@matronics.com [mailto:owner-rv6-list-server@matronics.com] On Behalf Of MnwPeeps@aol.com Sent: Thursday, September 17, 2009 10:35 AM Subject: Re: RV6-List: Leaking tank Keith - I just talked to my mech, and - to my surprise - he couldn't remember the name of the product! But he will, and I've asked him to call me right away when he does, and we'll get it to you. Tom In a message dated 9/17/2009 8:17:24 A.M. Eastern Daylight Time, khedrick@frontiernet.net writes: Yes, Tom. I would like the name of this stuff as I have that same leading edge leak. ________________________________ Message 4 _____________________________________ Time: 11:43:35 AM PST US From: MnwPeeps@aol.com Subject: Re: RV6-List: Leaking tank He will. In a message dated 9/17/2009 2:04:02 P.M. Eastern Daylight Time, khedrick@frontiernet.net writes: Maybe he will remember. ________________________________ Message 5 _____________________________________ Time: 02:43:32 PM PST US From: Robert Murillo Subject: RV6-List: Leaking tank Hello - Nedd help,- have my right tank on my rv6a with a small leak.. I did tried using proseal on the edeges,- lthat did not work, or I did a bad job.. - - Any sugestions from those with experience on this problem? - Woul appreciate it,, - thanks - robert - rv6a - - do not archive=0A=0A__________________________________________________=0ADo ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message rv6-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/RV6-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/rv6-list Browse Digests http://www.matronics.com/digest/rv6-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.