RV6-List Digest Sun 05/22/11

RV6-List Digest Archive

Sun 05/22/11

Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 05:46 AM - Avery Rudder Cable Fairing (colleenandbrett@comcast.net)
     2. 06:21 AM - Re: Avery Rudder Cable Fairing (Jeff Orear)
     3. 08:37 AM - Re: Avery Rudder Cable Fairing (John Brunke)
 
 
 

Message 1


					INDEX  Back to Main INDEX
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 05:46:55 AM PST US
From: colleenandbrett@comcast.net
Subject: Avery Rudder Cable Fairing      
      
      When installing the Avery Rudder Cable Fairing, does one still install the bolt
      / clamp to retain / locate the 3/8" diameter polyethylene tube as shown on drawing
      # 34 or does this fairing alone pushing against this tube provide sufficient
      retention? 
      
      
      Thanks. 
      
      
      Brett 
      
      Columbus, IN 
      
      RV-6AQ Installing the rudder cables 
      

Message 2


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:21:43 AM PST US
Subject: Re: Avery Rudder Cable Fairing
From: Jeff Orear <jorear@new.rr.com>      
      Brett, I installed both the clamp and fairing.  More structurally sound and r
      etains the poly tube much better than relying on the fairing alone.
      
      Best Regards, 
      
      Jeff Orear
      RV6A N782P
      Peshtigo, WI
      
      Sent from my iPad
      
      On May 22, 2011, at 7:43 AM, colleenandbrett@comcast.net wrote:
      
      > When installing the Avery Rudder Cable Fairing, does one still install the
       bolt / clamp to retain / locate the 3/8" diameter polyethylene tube as show
      n on drawing # 34 or does this fairing alone pushing against this tube provi
      de sufficient retention?
      > 
      >  
      > 
      > Thanks.
      > 
      >  
      > 
      > Brett
      > 
      > Columbus, IN
      > 
      > RV-6AQ Installing the rudder cables
      > 
      > 
      > 
      > 
      ==========================
      =========
      ==========================
      =========
      ==========================
      =========
      ==========================
      =========
      > 
      

Message 3


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 08:37:59 AM PST US
From: John Brunke <jdoody727@comcast.net>
Subject: Re: Avery Rudder Cable Fairing      
      I second Jeff's installation.   You would hate for something to jam back 
      there someday if the tubing came loose.
      John Brunke
      RV7QB slow build.
      Saint Charles, IL
      
      
      On May 22, 2011, at 8:20 AM, Jeff Orear wrote:
      
      > Brett, I installed both the clamp and fairing.  More structurally 
      sound and retains the poly tube much better than relying on the fairing 
      alone.
      > 
      > Best Regards, 
      > 
      > Jeff Orear
      > RV6A N782P
      > Peshtigo, WI
      > 
      > Sent from my iPad
      > 
      > On May 22, 2011, at 7:43 AM, colleenandbrett@comcast.net wrote:
      > 
      >> When installing the Avery Rudder Cable Fairing, does one still 
      install the bolt / clamp to retain / locate the 3/8" diameter 
      polyethylene tube as shown on drawing # 34 or does this fairing alone 
      pushing against this tube provide sufficient retention?
      >> 
      >>  
      >> Thanks.
      >> 
      >>  
      >> Brett
      >> 
      >> Columbus, IN
      >> 
      >> RV-6AQ Installing the rudder cables
      >> 
      >> 
      >> 
      >> 
      >> 
      > 
      > 
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
      3D
      > 
      
      








Other Matronics Email List Services




Post A New Message    rv6-list@matronics.com
UN/SUBSCRIBE    http://www.matronics.com/subscription
List FAQ    http://www.matronics.com/FAQ/RV6-List.htm
Web Forum Interface To Lists    http://forums.matronics.com
Matronics List Wiki    http://wiki.matronics.com
7-Day List Browse    http://www.matronics.com/browse/rv6-list
Browse RV6-List Digests    http://www.matronics.com/digest/rv6-list
Browse Other Lists    http://www.matronics.com/browse
Live Online Chat!    http://www.matronics.com/chat
Archive Downloading    http://www.matronics.com/archives
Photo Share    http://www.matronics.com/photoshare
Other Email Lists    http://www.matronics.com/emaillists
Contributions    http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --