Today's Message Index:
----------------------
1. 02:53 PM - Re: RV6-List Digest: 3 Msgs - 05/22/11 (bert murillo)
2. 06:48 PM - Avery Rudder Cable Fairing (Colleen and Brett Herrick)
3. 07:53 PM - Re: Avery Rudder Cable Fairing (Jeff Orear)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV6-List Digest: 3 Msgs - 05/22/11 |
of course, yes yes
On Mon, May 23, 2011 at 3:00 AM, RV6-List Digest Server
<rv6-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete RV6-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the RV6-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 11-05-22&Archive=RV6
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 11-05-22&Archive=RV6
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> RV6-List Digest Archive
> ---
> Total Messages Posted Sun 05/22/11: 3
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 05:46 AM - Avery Rudder Cable Fairing (colleenandbrett@comcast.net)
> 2. 06:21 AM - Re: Avery Rudder Cable Fairing (Jeff Orear)
> 3. 08:37 AM - Re: Avery Rudder Cable Fairing (John Brunke)
>
>
> ________________________________ Message 1 _____________________________________
>
>
> Time: 05:46:55 AM PST US
> From: colleenandbrett@comcast.net
> Subject: RV6-List: Avery Rudder Cable Fairing
>
>
> When installing the Avery Rudder Cable Fairing, does one still install the bolt
> / clamp to retain / locate the 3/8" diameter polyethylene tube as shown on drawing
> # 34 or does this fairing alone pushing against this tube provide sufficient
> retention?
>
>
> Thanks.
>
>
> Brett
>
> Columbus, IN
>
> RV-6AQ Installing the rudder cables
>
> ________________________________ Message 2 _____________________________________
>
>
> Time: 06:21:43 AM PST US
> Subject: Re: RV6-List: Avery Rudder Cable Fairing
> From: Jeff Orear <jorear@new.rr.com>
>
> Brett, I installed both the clamp and fairing. More structurally sound and r
> etains the poly tube much better than relying on the fairing alone.
>
> Best Regards,
>
> Jeff Orear
> RV6A N782P
> Peshtigo, WI
>
> Sent from my iPad
>
> On May 22, 2011, at 7:43 AM, colleenandbrett@comcast.net wrote:
>
>> When installing the Avery Rudder Cable Fairing, does one still install the
> bolt / clamp to retain / locate the 3/8" diameter polyethylene tube as show
> n on drawing # 34 or does this fairing alone pushing against this tube provi
> de sufficient retention?
>>
>>
>>
>> Thanks.
>>
>>
>>
>> Brett
>>
>> Columbus, IN
>>
>> RV-6AQ Installing the rudder cables
>>
>>
>>
>>
> =========================
> ========
> =========================
> ========
> =========================
> ========
> =========================
> ========
>>
>
> ________________________________ Message 3 _____________________________________
>
>
> Time: 08:37:59 AM PST US
> From: John Brunke <jdoody727@comcast.net>
> Subject: Re: RV6-List: Avery Rudder Cable Fairing
>
> I second Jeff's installation. You would hate for something to jam back
> there someday if the tubing came loose.
> John Brunke
> RV7QB slow build.
> Saint Charles, IL
>
>
> On May 22, 2011, at 8:20 AM, Jeff Orear wrote:
>
>> Brett, I installed both the clamp and fairing. More structurally
> sound and retains the poly tube much better than relying on the fairing
> alone.
>>
>> Best Regards,
>>
>> Jeff Orear
>> RV6A N782P
>> Peshtigo, WI
>>
>> Sent from my iPad
>>
>> On May 22, 2011, at 7:43 AM, colleenandbrett@comcast.net wrote:
>>
>>> When installing the Avery Rudder Cable Fairing, does one still
> install the bolt / clamp to retain / locate the 3/8" diameter
> polyethylene tube as shown on drawing # 34 or does this fairing alone
> pushing against this tube provide sufficient retention?
>>>
>>>
>>> Thanks.
>>>
>>>
>>> Brett
>>>
>>> Columbus, IN
>>>
>>> RV-6AQ Installing the rudder cables
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
> 3D==============
> 3D==============
> 3D==============
> 3D
>>
> 3D==============
> 3D==============
> 3D==============
> 3D
>>
> 3D==============
> 3D==============
> 3D==============
> 3D
>>
> 3D==============
> 3D==============
> 3D==============
> 3D
>>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Avery Rudder Cable Fairing |
Thanks for the responses!
I will install the clamp.
So, to take it a bit further, I am assuming that the fairing should not
trap the 3/8" polyethylene tube against the fuselage skin so that the
rudder cable can be removed with the fairing riveted in place. Thus,
the 3/8" x 1 1/8" oval opening that I have made should be longer.
Correct?
Thanks.
Brett Herrick
RV-6A Installing the rudder cables
Columbus, IN
Time: 08:37:59 AM PST US
From: John Brunke <jdoody727@comcast.net>
Subject: Re: RV6-List: Avery Rudder Cable Fairing
I second Jeff's installation. You would hate for something to jam back
there someday if the tubing came loose.
John Brunke
RV7QB slow build.
Saint Charles, IL
On May 22, 2011, at 8:20 AM, Jeff Orear wrote:
> Brett, I installed both the clamp and fairing. More structurally
sound and retains the poly tube much better than relying on the fairing
alone.
>
> Best Regards,
>
> Jeff Orear
> RV6A N782P
> Peshtigo, WI
>
> Sent from my iPad
>
> On May 22, 2011, at 7:43 AM, colleenandbrett@comcast.net wrote:
>
>> When installing the Avery Rudder Cable Fairing, does one still
install the bolt / clamp to retain / locate the 3/8" diameter
polyethylene tube as shown on drawing # 34 or does this fairing alone
pushing against this tube provide sufficient retention?
>>
>>
>> Thanks.
>>
>>
>> Brett
>>
>> Columbus, IN
>>
>> RV-6AQ Installing the rudder cables
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Avery Rudder Cable Fairing |
I have that tube extending out into the fairing. The fairing is
actually helping to direct the tube/cable toward the rudder horn. I
guess if I had to remove the cable, six rivets drilled out and the
fairing is off. To be honest, I doubt if I ever will need to remove
those cables.
Regards,
Jeff Orear
RV6A N782P
Peshtigo, WI
On May 24, 2011, at 8:44 PM, "Colleen and Brett Herrick" <colleenandbrett@comcast.net
> wrote:
> Thanks for the responses!
>
> I will install the clamp.
>
> So, to take it a bit further, I am assuming that the fairing should
> not trap the 3/8" polyethylene tube against the fuselage skin so
> that the rudder cable can be removed with the fairing riveted in
> place. Thus, the 3/8" x 1 1/8" oval opening that I have made should
> be longer. Correct?
>
> Thanks.
>
> Brett Herrick
> RV-6A Installing the rudder cables
> Columbus, IN
>
>
> Time: 08:37:59 AM PST US
> From: John Brunke <jdoody727@comcast.net>
> Subject: Re: RV6-List: Avery Rudder Cable Fairing
>
> I second Jeff's installation. You would hate for something to jam back
> there someday if the tubing came loose.
> John Brunke
> RV7QB slow build.
> Saint Charles, IL
>
>
> On May 22, 2011, at 8:20 AM, Jeff Orear wrote:
>
> > Brett, I installed both the clamp and fairing. More structurally
> sound and retains the poly tube much better than relying on the
> fairing
> alone.
> >
> > Best Regards,
> >
> > Jeff Orear
> > RV6A N782P
> > Peshtigo, WI
> >
> > Sent from my iPad
> >
> > On May 22, 2011, at 7:43 AM, colleenandbrett@comcast.net wrote:
> >
> >> When installing the Avery Rudder Cable Fairing, does one still
> install the bolt / clamp to retain / locate the 3/8" diameter
> polyethylene tube as shown on drawing # 34 or does this fairing alone
> pushing against this tube provide sufficient retention?
> >>
> >>
> >> Thanks.
> >>
> >>
> >> Brett
> >>
> >> Columbus, IN
> >>
> >> RV-6AQ Installing the rudder cables
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|