----------------------------------------------------------
                           RV7-List Digest Archive
                                      ---
                     Total Messages Posted Tue 01/14/03: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:28 AM - Re: Canopy frame  (cary rhodes)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:28:43 AM PST US
From: cary rhodes <rhodeseng@yahoo.com>
Subject: Re: RV7-List: Canopy frame

--> RV7-List message posted by: cary rhodes <rhodeseng@yahoo.com>

Tom

I was just there last nite

The 617 and 168 are fiber blocks 

They are in one of the bags

The 619 is a 1/4 inch bar of alum.

The one sent with the the tip up kit is about 1 1/4
wide and about 8 inches long.

I didn't want to cut out a chunk of the bar, but I had
a 1/4 angle I whacked up.

I believe the drawing was 47

cary
finish stuff


--- Tom Reading <treading@comcast.net> wrote:
> --> RV7-List message posted by: Tom Reading
> <treading@comcast.net>
> 
>  Just finished up the linkage to the frame and was
> reading ahead where it
> said to mount the c-617 618 619 blocks. Its most
> likely simple but I can't
> locate the blocks on the prints or spare parts.
>  Thanks
>  Tom,775TR RES Canopy
> 
> 
>
> Contributions
> any other
> Forums.
>
> latest messages.
> List members.
>
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/RV7-List.htm
> Digests:http://www.matronics.com/digest/rv7-list
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
> 
> 
> 
>