Today's Message Index:
----------------------
1. 02:03 AM - Re: Horizontal Stabilizer Rivets (Dan Checkoway)
Message 1
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Horizontal Stabilizer Rivets |
--> RV7-List message posted by: "Dan Checkoway" <dan@rvproject.com>
The easiest way to do it is to leave the inboard nose ribs just clecoed on
(as opposed to riveting those ribs on). Then, when you go to shoot/buck the
center nose rib rivets, remove the inboard ribs and reach your arm in to
buck.
)_( Dan
RV-7 N714D (finish)
http://www.rvproject.com
----- Original Message -----
From: "Jim Thorne" <j.thorne@cox.net>
Subject: RV7-List: Horizontal Stabilizer Rivets
> --> RV7-List message posted by: "Jim Thorne" <j.thorne@cox.net>
>
> Is there any reasonable way to buck the rivets in the center rib of the
HS? I looked at some other RV's and they have used some blind rivets on
part of the bottom skin. The plans say these are optional, after trying to
get all shapes of bucking bars in there it doesn't appear "optional" to me.
Looks like I'm headed that way also unless I am missing something.
>
> Jim Thorne
> RV7A QB
> CHD Arizona
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|