---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Mon 05/12/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:50 AM - Re: Riveting R901 skin to R904 to R710 horn brace on RV7 Rudder (new style) - rivet callout (cary rhodes) ________________________________ Message 1 _____________________________________ Time: 04:50:49 AM PST US From: cary rhodes Subject: Re: RV7-List: Riveting R901 skin to R904 to R710 horn brace on RV7 Rudder (new style) - rivet callout --> RV7-List message posted by: cary rhodes Dom order you some 3/32 pulled rivets from Aircraft Spruce or someone. It will get you out of situations like this when the alternative solution is not attractive. cary rhodes --- Dom Forrest wrote: > --> RV7-List message posted by: "Dom Forrest" > > > > Hi, > I'm confused by the rivet callout on drawing 7 > for the above parts. It > reads > > "AN426AD3-4 (CS4-4 OPTIONAL) ALL R-901 SKIN TO R-904 > BOTTOM RIB TO R-710 > HORN BRACE RIVETS" > > > Unless I'm missing something the CS4-4 requires a > larger dimple than the > AN426AD3-4 - which can't be added at this stage. > > Is the callout correct or should the alternative be > MK-319-BS? > > > If the callout is correct how are you meant to > enlarge the dimple at this > stage? > > > Many Thanks > > > Dom > > > > Contributions > any other > Forums. > > latest messages. > List members. > > http://www.matronics.com/subscription > http://www.matronics.com/FAQ/RV7-List.htm > Digests:http://www.matronics.com/digest/rv7-list > http://www.matronics.com/archives > http://www.matronics.com/photoshare > http://www.matronics.com/emaillists > > > > > __________________________________ http://search.yahoo.com