Today's Message Index:
----------------------
1. 06:03 AM - Re: Rivets and rivet guns, etc REPLY (OAITX@AOL.com)
2. 10:23 PM - No subject as you will give it a new one shortly after you flame me (Lyle Peterson)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Rivets and rivet guns, etc REPLY |
--> RV7-List message posted by: OAITX@aol.com
Avery has a tool kit that I bought. I recommend it. I, too, was just
starting out and didn't have anything......well, I had basic garage/workshop
tools, but no aircraft tools.
I did go the extra and got the pneumatic rivet gun/dimpler in addition to the
2X rivet gun that is in the tool kit. It works GREAT. The dimples and the
rivets are consistent. You still have to use the C-Frame to dimple the center
areas.
Bob Lake
RV-7 QB
512 251-2277
512 251-7707 FAX
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
<rv7-list@matronics.com>, <rv8-list@matronics.com>,
<rv9-list@matronics.com>
| Subject: | No subject as you will give it a new one shortly after you flame |
me
SUSPICIOUS_RECIPS
--> RV7-List message posted by: "Lyle Peterson" <lyleap@access4less.net>
It is so disheartening to learn that aviators are so narrow minded and
selfish. If you people had used one tenth of the energy you expended on
blasting my question to providing useful information, you could have
written a book. As is it you only demonstrated that you 1. Don't know
the answers, 2. Think that your knowledge is so unique that it can't be
shared, 3. You have an immense amount of time to waste, 4. You have
absolutely no respect for other people, whether they be builders or not.
Someone suggested that the question was 'stupid.' The only stupid
question is one that you can't answer!
I checked the archives for the "gazillion" answers to be found there. I
found four and not all of them pertained directly to my question. None
of them covered all the questions I had posed.
A few responded off list. They probably did not want to be caught by
the lords of the list giving information to a new builder. I do thank
those few for the information they so generously shared. They are very
unlike the rest of the listers. Some two thousand people on these lists
and only a very few are willing to answer. Rather, several find the
time to waste flaming the questioner. The thread continues under the
guise of a 'Food Fight.' How charming!
So many messages use an existing subject because so few of you have
figured out how to start a new thread on the list. Shame, shame. Look
at the bottom of the message for the information you need. You don't
even have to ask a question of the list, and thus get flamed for a
stupid question.
I did envision one day flying it to Oshkosh. If I do, which is
doubtful, I will park it in the Vintage area. There are some folks
there that will talk decently to you about airplanes and lots of other
things.
If you get too many copies of this email, use the delete key.
Thanks for nothing,
Lyle Peterson
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|