---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Mon 12/01/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:25 AM - Re: Size of skin match drilling holes in horizontal stabilizer (Jim Percy) ________________________________ Message 1 _____________________________________ Time: 06:25:15 AM PST US From: "Jim Percy" Subject: RV7-List: Re: Size of skin match drilling holes in horizontal stabilizer --> RV7-List message posted by: "Jim Percy" It was probably a simple slip-up but one poster said that a #3 rivet is 3/16" and a #4 is 1/4".... those numbers are for bolts. Rivets are in measured 32's- a #3 is 3/32" and a #4 is 1/8". Jim