---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Sat 12/20/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:19 PM - (Rick Rushing) 2. 03:43 PM - Re: Cork or not to Cork? (Cammie Patch) ________________________________ Message 1 _____________________________________ Time: 01:19:36 PM PST US From: Rick Rushing Subject: RV7-List: --> RV7-List message posted by: Rick Rushing Is anyone looking at the Grand Rapids Horizon 1 EFIS package? I would appreciate any input. Rick Rushing RV 7A Wings attached!!!! ________________________________ Message 2 _____________________________________ Time: 03:43:56 PM PST US From: "Cammie Patch" Subject: RE: RV7-List: Cork or not to Cork? --> RV7-List message posted by: "Cammie Patch" Hands aren't a problem, try getting it out of your hair! (don't use MEK!!!!) do not archive -----Original Message----- From: owner-rv7-list-server@matronics.com [mailto:owner-rv7-list-server@matronics.com]On Behalf Of Darwin N. Barrie RV7and7A@yahoogroups.com Subject: RV7-List: Cork or not to Cork? --> RV7-List message posted by: "Darwin N. Barrie" Thanks to everyone that provided their experiences. I got about a 50-50 response on corking vs. not corking. The biggest issue seemed to be that cork would be easier to open up again should the need arise. I decided to use the cork and the task is done. I used 8x32 stainless socket head screws. They worked great. Wings installed today. On a final note, I don't care if I ever see Proseal again in this life time!!!!!!! Anyone know how long this stuff will be on my hands? Darwin N. Barrie Chandler AZ Crossflow Subaru