---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Tue 02/24/04: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:38 AM - Re: Installing the Static Air System (LarryRobertHelming) 2. 05:55 AM - Re: Installing the Static Air System (Hopperdhh@AOL.com) 3. 06:43 AM - Re: Installing the Static Air System (Mark Taylor) 4. 04:50 PM - Re: Installing the Static Air System (Franz Fux) 5. 08:20 PM - Re: Installing the Static Air System (Karie Daniel) ________________________________ Message 1 _____________________________________ Time: 05:38:53 AM PST US From: "LarryRobertHelming" Subject: Re: RV7-List: Installing the Static Air System --> RV7-List message posted by: "LarryRobertHelming" The static air entry is near the shoulder harness anchor. Indiana Larry, RV7 Tip-up TMX-O-360 ACS2002 Dynon CNS430 Digitrak Firewall Forward ----- Original Message ----- From: "Karie Daniel" Subject: RV7-List: Installing the Static Air System > --> RV7-List message posted by: "Karie Daniel" > > I'm looking at the installation instructions for the static air system. The Static Air kit.doc and it looks like this is installed on the bulkhead just aft of the baggage compartment bulkhead. However after looking at some installs on other builders web sites it appears to the on the bulkhead near the seat beat anchor, just below the anchors for the static ports. > > Is the correct bulkhead the one nearest the seatbelt anchors? It looks like the document clearly has it on the one forward of that bulkhead. > > Thanks, > > Karie Daniel > Sammamish, WA. > RV-7A In Progress! > > ________________________________ Message 2 _____________________________________ Time: 05:55:01 AM PST US From: Hopperdhh@AOL.com Subject: Re: RV7-List: Installing the Static Air System --> RV7-List message posted by: Hopperdhh@aol.com Karie, I know there have several replies already, but the "suggested static port location" is shown clearly on DWG 28, the rivet callout drawing. Dan N766DH RV-7A (almost done) In a message dated 2/23/04 11:26:03 PM US Eastern Standard Time, karie4@comcast.net writes: > > --> RV7-List message posted by: "Karie Daniel" > > I'm looking at the installation instructions for the static air system. The > Static Air kit.doc and it looks like this is installed on the bulkhead just > aft of the baggage compartment bulkhead. However after looking at some > installs on other builders web sites it appears to the on the bulkhead near the seat > beat anchor, just below the anchors for the static ports. > > Is the correct bulkhead the one nearest the seatbelt anchors? It looks like > the document clearly has it on the one forward of that bulkhead. > > Thanks, > > Karie Daniel > Sammamish, WA. > RV-7A In Progress! > ________________________________ Message 3 _____________________________________ Time: 06:43:18 AM PST US From: "Mark Taylor" Subject: Re: RV7-List: Installing the Static Air System --> RV7-List message posted by: "Mark Taylor" Karie, Let us know what Van's says after speaking to them. I already fitted my ports, and (like an idiot) opted for the location that came with the kit. Looking back and reading these posts, I've a feeling I have messed up. Thanks! Mark Taylor CAD Technical Specialist (313) 203-4714 >>> karie4@comcast.net 02/23/04 11:26PM >>> --> RV7-List message posted by: "Karie Daniel" I'm looking at the installation instructions for the static air system. The Static Air kit.doc and it looks like this is installed on the bulkhead just aft of the baggage compartment bulkhead. However after looking at some installs on other builders web sites it appears to the on the bulkhead near the seat beat anchor, just below the anchors for the static ports. Is the correct bulkhead the one nearest the seatbelt anchors? It looks like the document clearly has it on the one forward of that bulkhead. Thanks, Karie Daniel Sammamish, WA. RV-7A In Progress! ________________________________ Message 4 _____________________________________ Time: 04:50:54 PM PST US From: "Franz Fux" Subject: RE: RV7-List: Installing the Static Air System --> RV7-List message posted by: "Franz Fux" Just look at drawing # 28, detail E, Franz -----Original Message----- From: owner-rv7-list-server@matronics.com [mailto:owner-rv7-list-server@matronics.com]On Behalf Of Mark Taylor Subject: Re: RV7-List: Installing the Static Air System --> RV7-List message posted by: "Mark Taylor" Karie, Let us know what Van's says after speaking to them. I already fitted my ports, and (like an idiot) opted for the location that came with the kit. Looking back and reading these posts, I've a feeling I have messed up. Thanks! Mark Taylor CAD Technical Specialist (313) 203-4714 >>> karie4@comcast.net 02/23/04 11:26PM >>> --> RV7-List message posted by: "Karie Daniel" I'm looking at the installation instructions for the static air system. The Static Air kit.doc and it looks like this is installed on the bulkhead just aft of the baggage compartment bulkhead. However after looking at some installs on other builders web sites it appears to the on the bulkhead near the seat beat anchor, just below the anchors for the static ports. Is the correct bulkhead the one nearest the seatbelt anchors? It looks like the document clearly has it on the one forward of that bulkhead. Thanks, Karie Daniel Sammamish, WA. RV-7A In Progress! --- Incoming mail is certified Virus Free. --- ________________________________ Message 5 _____________________________________ Time: 08:20:47 PM PST US From: "Karie Daniel" Subject: Re: RV7-List: Installing the Static Air System --> RV7-List message posted by: "Karie Daniel" Thanks for all of the replies. As noticed by several other builders, drawing #28 does point this out clearly to be the more aft bulkhead (closest to the seatbelt anchor). This doesn't really match up to the unclear one page document that is included with the static kit but the drawing on the plans page would be correct. It actually calls it the "suggested" placement for the static port. You could assume and most probably know already that it should work in either place though. Following Vans suggestion and it really seems more of a likely place anyway, I'll be installing it there. I would say that it would be nice to have a little blurb on the static kit instructions that references drawing 28 but that would really be whining.......wouldn't it? :-) Thanks again everyone, Karie Daniel Sammamish, WA RV-7A ----- Original Message ----- From: "Franz Fux" Subject: RE: RV7-List: Installing the Static Air System > --> RV7-List message posted by: "Franz Fux" > > Just look at drawing # 28, detail E, > Franz > > -----Original Message----- > From: owner-rv7-list-server@matronics.com > [mailto:owner-rv7-list-server@matronics.com]On Behalf Of Mark Taylor > To: rv7-list@matronics.com > Subject: Re: RV7-List: Installing the Static Air System > > > --> RV7-List message posted by: "Mark Taylor" > > Karie, > > Let us know what Van's says after speaking to them. I already fitted my > ports, and (like an idiot) opted for the location that came with the > kit. Looking back and reading these posts, I've a feeling I have messed > up. > > Thanks! > > Mark Taylor > CAD Technical Specialist > (313) 203-4714 > > >>> karie4@comcast.net 02/23/04 11:26PM >>> > --> RV7-List message posted by: "Karie Daniel" > > I'm looking at the installation instructions for the static air system. > The Static Air kit.doc and it looks like this is installed on the > bulkhead just aft of the baggage compartment bulkhead. However after > looking at some installs on other builders web sites it appears to the > on the bulkhead near the seat beat anchor, just below the anchors for > the static ports. > > Is the correct bulkhead the one nearest the seatbelt anchors? It looks > like the document clearly has it on the one forward of that bulkhead. > > Thanks, > > Karie Daniel > Sammamish, WA. > RV-7A In Progress! > > > --- > Incoming mail is certified Virus Free. > > --- > >