---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Sun 03/21/04: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:29 AM - Re: Elevator Bolt and Washers (Hopperdhh@AOL.com) ________________________________ Message 1 _____________________________________ Time: 04:29:25 AM PST US From: Hopperdhh@AOL.com Subject: Re: RV7-List: Elevator Bolt and Washers --> RV7-List message posted by: Hopperdhh@aol.com In a message dated 3/20/04 11:26:53 PM US Eastern Standard Time, afulmer@charter.net writes: > > --> RV7-List message posted by: "Allen Fulmer" > > Does the AN4-14A Bolt and all the washers used to attach the elevator horns > to the hinge bearing come with the empennage kit? Can't find it at this > point. > > Allen Fulmer > Empennage almost finished! > N808AF reserved > > Drawing 5PP shows an AN4-12A Bolt, and there is one in Bag 413 and one in Bag 617 in the empennage kit. However, I had to order an AN4-15A to work for me. I also had to use an all steel nut with 5/16 hex so I could get a wrench on it. But that's probably my fault for drilling the hole too close to the shaft. Dan Hopper RV-7A (almost done)