Today's Message Index:
----------------------
1. 12:56 PM - Re: Fuel tank alignment (Imken)
2. 03:42 PM - Re: Fuel tank alignment (LarryRobertHelming)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Fuel tank alignment |
--> RV7-List message posted by: "Imken" <skikrazi@CenturyTel.net>
I had no problem with alignment......AFTER I clecoed the tank (before ANY
riveting) to the main spar and drilled the Z-brackets using the main spar as
a drill guide.......which is a little different than Van's instructions but
makes a more exact fit. I screwed up the first set of Z-brackets by using
Van's instructions.
Chuck
-----Original Message-----
From: owner-rv7-list-server@matronics.com
[mailto:owner-rv7-list-server@matronics.com]On Behalf Of
allenblck@netscape.net
Subject: RV7-List: Fuel tank alignment
--> RV7-List message posted by: allenblck@netscape.net
Has anyone checked to be sure their tank was square before riviting the back
baffle plate on? What I'm trying to say is "Has anyone had any alignment
problem with the tank to the spar after the back baffle was rivited on?"
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register
Netscape. Just the Net You Need.
New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Fuel tank alignment |
--> RV7-List message posted by: "LarryRobertHelming" <lhelming@sigecom.net>
I did the same thing screwing up the first set of Zs a couple of years ago.
I REMEMBER IT!!! I still use the old buggered up Z brackets for different
things now that I am on the finish and FWF kits. So, it was not a total
waste. But it can be frustrating at times. Sometimes the instructions are
so vividly clear and detailed and other times........... Part of the
experience and learning I guess. You will live through it. Endurance.
Even keel. Stick-to-it-tive-ness. do not archive.
Indiana Larry, RV7 TipUp "SunSeeker"
----- Original Message -----
From: "Imken" <skikrazi@centurytel.net>
Subject: RE: RV7-List: Fuel tank alignment
> --> RV7-List message posted by: "Imken" <skikrazi@CenturyTel.net>
>
> I had no problem with alignment......AFTER I clecoed the tank (before ANY
> riveting) to the main spar and drilled the Z-brackets using the main spar
as
> a drill guide.......which is a little different than Van's instructions
but
> makes a more exact fit. I screwed up the first set of Z-brackets by using
> Van's instructions.
> Chuck
>
> -----Original Message-----
> From: owner-rv7-list-server@matronics.com
> [mailto:owner-rv7-list-server@matronics.com]On Behalf Of
> allenblck@netscape.net
> To: rv7-list@matronics.com
> Subject: RV7-List: Fuel tank alignment
>
>
> --> RV7-List message posted by: allenblck@netscape.net
>
> Has anyone checked to be sure their tank was square before riviting the
back
> baffle plate on? What I'm trying to say is "Has anyone had any alignment
> problem with the tank to the spar after the back baffle was rivited on?"
>
> Switch to Netscape Internet Service.
> As low as $9.95 a month -- Sign up today at
http://isp.netscape.com/register
>
> Netscape. Just the Net You Need.
>
> New! Netscape Toolbar for Internet Explorer
> Search from anywhere on the Web and block those annoying pop-ups.
> Download now at http://channels.netscape.com/ns/search/install.jsp
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|