---------------------------------------------------------- RV7-List Digest Archive --- Total Messages Posted Thu 10/14/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:47 AM - Re: RV7 primer primer (Richard Tasker) 2. 07:53 PM - Slobovia Outernational BBQ 2 day warning (Charlie England) ________________________________ Message 1 _____________________________________ Time: 08:47:08 AM PST US From: Richard Tasker Subject: Re: RV7-List: RV7 primer primer --> RV7-List message posted by: Richard Tasker Well, the one I originally designed for my plane is basically done except for final testing. However, the one I volunteered to design for the Subaru group didn't go anywhere because everyone had different opinions on what they wanted it to do - many of them conflicting. So I ended up doing nothing more on it. Dick Tasker Brian Meyette wrote: >--> RV7-List message posted by: "Brian Meyette" > >Thanks, Dick! I believe you were working on an alternative electrical >system for the Eggenfellner engines. How is that coming along? >brian > >-----Original Message----- >From: owner-rv7-list-server@matronics.com >[mailto:owner-rv7-list-server@matronics.com]On Behalf Of Richard E. Tasker >To: rv7-list@matronics.com.Gecko/20040803 >Subject: Re: RV7-List: RV7 primer primer > >--> RV7-List message posted by: "Richard E. Tasker" > >http://www.aircraftfinishing.com/ > >Dick Tasker > >Brian Meyette wrote: > > > >>--> RV7-List message posted by: "Brian Meyette" >> >>What exactly is the AFS the last 3 messages referred to? >>brian >> >>-----Original Message----- >>From: owner-rv7-list-server@matronics.com >>[mailto:owner-rv7-list-server@matronics.com]On Behalf Of George Neal E Capt >>AU/PC >>To: rv7-list@matronics.com >>Subject: RE: RV7-List: RV7 primer primer >> >>--> RV7-List message posted by: George Neal E Capt AU/PC >> >> >>Welcome Andy >> >>My tail has an assortment of SW-988 (expensive garbage), Rustoleum (what >> >> >was > > >>I thinking) and VeriPrime (good stuff, but needs a topcoat). >> >>Were I to start over, I'd use AFS to prime the contact points where >>dissimilar metals meet and alodine the extruded parts. Leave the rest of >> >> >it > > >>as-is. The other primers are all great as an integral part of their >>respective finishing systems, but according to all the literature and sales >>reps, offer no moisture barrier - they are intended to be top-coated. >>Without a top-coat they are porous and would actually attract and wick >>moisture and the stuff dissolved in it. >> >>I used screws and nutplates to mount my fiberglass tips. I still don't >> >> >like > > >>the idea of using pop rivets. After the plane is painted I will treat it >>with Corrosion-X. Can't do that with the tips on. >> >>Neal >>RV-7 N8ZG >>Wings - and short on clecos >> >> >>--- >> >>--- >> >> >> >> > > >--- > >--- > > > > ________________________________ Message 2 _____________________________________ Time: 07:53:06 PM PST US From: Charlie England Subject: RV7-List: Slobovia Outernational BBQ 2 day warning --> RV7-List message posted by: Charlie England We hope to see you here at Slobovia Outernational Saturday morning to eat BBQ & talk airplanes. We expect to have a good turnout of homebuilts & classics, with some alternative engines in the mix. Info on Slobovia (MS71) can be found at http://www.airnav.com/airport/MS71 or you can email me direct for driving directions. Charlie flying RV-4; RV-7 wings